Installing lumbar support
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Press the retaining bars -4-
together and engage them in the backrest frame - A-
.
- Fold down lumbar support - B- .
- Join the lumbar support and backrest frame using a new blind rivet -3-
.
- Plug in electric plug connections for lumbar support adjustment motor -1-
and lumbar curvature motor -2-
until they engage securely.