LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 743 (72 - Seat Frames) >> WM 723419 Removing and installing lumbar support >> Removing lumbar support

Removing lumbar support

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release and disconnect electric plug connection for lumbar support adjustment motor -1-  and lumbar curvature motor -2- (-a-)  .
    G12890533
  2. Drill out blind rivets -3-  using a suitable drill bit.
    G12890534
  3. Fold the lumbar support up - A-  and press the retaining bars -4-  at the left and right together.

    Disengage retaining bars -4-  from the backrest frame - B-  .

    G12890535
  4. Remove the complete lumbar support from the backrest frame.
scientia non olet · About LEMON Manuals