Section 37 (Engine Mechanical (2.0L Engine Turbo) - Lancer)
WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
- General Information
- Engine Diagnosis
- Service Specifications
- Sealants And Adhesive
- Special Tools
- On-Vehicle Service
- Crankshaft Pulley
- Camshaft
- Removal And Installation
- Notes
- Removal Service Points
- << A >> Rocker Cover Assembly Removal
- << B >> Number 1 Cylinder Compression Top Dead Center Setting
- << C >> Camshaft And Camshaft Sprocket Assembly (Exhaust Side) Removal Preparatory Operation
- << D >> Front Camshaft Bearing Cap Removal
- << E >> Oil Feeding Camshaft Bearing Cap/Camshaft Bearing Cap/Thrust Camshaft Bearing Cap Removal
- << F >> Camshaft And Camshaft Sprocket Assembly (Exhaust Side) Removal
- << G >> Camshaft Sprocket Bolt/Camshaft Sprocket/Camshaft Removal
- << H >> Power Steering Oil Pump Assembly Removal
- << I >> Oil Feeder Control Valve Removal
- Installation Service Points
- >> A << O-Ring/Oil Feeder Control Valve Installation
- >> B << Camshaft/Camshaft Sprocket/Camshaft Sprocket Bolt Installation
- >> C << Camshaft And Camshaft Sprocket Assembly (Intake Side) Installation
- >> D << Thrust Camshaft Bearing Cap/Camshaft Bearing Cap/Oil Feeding Camshaft Bearing Cap/Camshaft Bearing Installation
- >> E << Camshaft Bearing/Camshaft And Camshaft Sprocket Assembly (Exhaust Side) Installation
- >> F << Front Camshaft Bearing Cap Installation
- >> G << Rocker Cover Assembly Installation
- Removal And Installation
- Valve Stem Seal
- Removal And Installation
- Notes
- Removal Service Points
- Installation Service Points
- >> A << Valve Stem Seal Installation
- >> B << Valve Spring Installation
- >> C << Valve Spring Retainer Lock Installation
- >> D << Valve Tappet Installation
- >> E << Thrust Camshaft Bearing Cap/Camshaft Bearing Cap/Oil Feeding Camshaft Bearing Cap Installation
- >> F << Camshaft Bearing/Camshaft And Camshaft Sprocket Assembly (Exhaust Side) Installation
- >> G << Front Camshaft Bearing Cap Installation
- Removal And Installation
- Oil Pan
- Crankshaft Oil Seal
- Cylinder Head Gasket
- Removal And Installation
- Notes
- Removal Service Points
- << A >> Radiator Upper Hose/Radiator Lower Hose Disconnection
- << B >> Fuel High-Pressure Hose Disconnection
- << C >> Front Camshaft Bearing Cap Removal
- << D >> Oil Feeding Camshaft Bearing Cap/Camshaft Bearing Cap/Thrust Camshaft Bearing Cap Removal
- << E >> Cylinder Head Bolt/Cylinder Head Bolt Washer/Cylinder Head Bolt And Washer Assembly Removal
- Installation Service Points
- >> B << Cylinder Head Bolt And Washer Assembly/Cylinder Head Bolt Washer/Cylinder Head Bolt Installation
- >> C << Camshaft Bearing/Camshaft And Camshaft Sprocket Assembly Installation
- Removal And Installation
- Timing Chain
- Engine Assembly