LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Engine Mechanical (2.0L Engine Turbo) - Lancer) >> Valve Stem Seal >> Removal And Installation >> Installation Service Points >> >> D << Valve Tappet Installation

>> D << Valve Tappet Installation

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply a small amount of engine oil to the valve tappets.
    CAUTION:
    • Do not use pliers or other tools to install the valve tappets. Always install them by hand.
    • Be sure to install the valve tappets in the same position as before.
  2. Install the valve tappet to the cylinder head.
    Fig 1: Installing Valve Tappets
    G05374144Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals