LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Engine Mechanical (2.0L Engine Turbo) - Lancer) >> Cylinder Head Gasket >> Removal And Installation >> Removal Service Points >> << E >> Cylinder Head Bolt/Cylinder Head Bolt Washer/Cylinder Head Bolt And Washer Assembly Removal

<< E >> Cylinder Head Bolt/Cylinder Head Bolt Washer/Cylinder Head Bolt And Washer Assembly Removal

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Loosen and remove the cylinder head bolts in two or three steps in the order of number shown in the figure.

Fig 1: Cylinder Head Bolt Loosening Sequence
G05374176Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals