51 16 165 Removing and installing (replacing) center console overview

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

Compliance with safety information is absolutely required.

Removal:

Number	Job number	Work step	Notes on safety	Tightening torques	Special tool	Notes
1	61 20 900	Clamp off BATTERY LEAD FROM NEGATIVE CONNECTION POINT	SAFETY INFORMATION for the AGM battery	61 21 1AZ		DISCONNECT AND CONNECT BATTERY . VOLTAGE SUPPLY/INTELLIGENT BATTERY SENSOR (IBS)
2	51 16...	Remove SIDE TRIM PANEL (CARPET) ON CENTER CONSOLE , left and right
3	51 16 227	Remove TRIM ON CENTER CONSOLE ON SIDE on left/right				When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).
4	51 16 163	Remove REAR CENTER CONSOLE COVER			00 9 325
5	51 16 178	Remove SIDE CLIP ON CENTER CONSOLE		51 16 25AZ	00 9 325
6	61 31 342	Remove GEAR SELECTOR SWITCH	Notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)	61 31 1AZ		When replacing the gear selector switch, perform VEHICLE PROGRAMMING/ENCODING
7	51 16 172	Remove CENTER ARMREST STORAGE COMPARTMENT			00 9 327
8	51 16 180	Remove CENTER CONSOLE .		51 16 4AZ , 51 16 10AZ , 51 16 24AZ	00 9 325 , 64 1 020

Additional work for replacements:

Number	Job number	Work step	Notes on safety	Tightening torques	Special tool	Notes
1	51 16 172	Remount CENTER ARMREST STORAGE COMPARTMENT
2	61 35 953 61 35 954	INTERIOR AERIAL FOR COMFORT ACCESS (front center console) INTERIOR AERIAL FOR COMFORT ACCESS (rear center console)				Only for vehicles with comfort access (Car Access)