Section 312 (Wheels, Chassis Alignment Check - 253 Chassis 2 Of 2)
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
- Testing & Repair
- Check Suspension Data, Assign Actual Value To Table
- Check Suspension Data, Assign Actual Value To Table - AR40.20-P-0001-01F
- Check Suspension Data, Assign Actual Value To Table - AR40.20-P-0001-01G
- Check Suspension Data, Assign Actual Value To Table - AR40.20-P-0001-01H
- Check Suspension Data, Assign Actual Value To Table - AR40.20-P-0001-01I
- Check Suspension Data, Assign Actual Value To Table - AR40.20-P-0001-01J
- Check Suspension Data, Assign Actual Value To Table - AR40.20-P-0001-01K
- Check Suspension Data, Assign Actual Value To Table - AR40.20-P-0001-01L
- Call Up Specified Suspension Data Online - AR40.20-P-0001A
- Perform Wheel Alignment Check - AR40.20-P-0200LW
- Assign Suspension Data - AR40.20-P-0203LWB
- Attaching Mercedes-Benz Quick-Clamping Devices - AR40.20-P-0230SX
- Adjust Rear-Axle Toe - AR40.20-P-0261LW
- Adjust Camber And Caster At The Front Axle - AR40.20-P-0263LW
- Adjust Front Axle Toe - AR40.20-P-0264LW
- Check Vehicle Level At Front And Rear Axle With Electronic Inclinometer, Adjust If Necessary - AR40.20-P-0301LW
- Carry Out Distance And Comparison Measurements On Front And Rear Axles - AR40.30-P-0402LW
- Check Suspension Data, Assign Actual Value To Table
- Test & Adjustment Values
- Maintenance
- Overview Of Assessment Of Tire Tread Depth And Condition Of Tires - AP40.10-P-4047U
- Overview Of Tire Checks For Damage And Crack Formation - AP40.10-P-4048U
- Check Tires For Damage And Crack Formations - AP40.10-P-4051EW
- Assess Condition And Tread Depth Of Tires - AP40.10-P-4052B
- Check Tirefit Tire Sealant - AP40.10-P-4054R
- Check/Correct Tire Pressure - AP40.15-P-4061A
- Full Overview Of Restarting Tire Pressure Monitor (TPM) - AP40.15-P-4069U
- Torque Specifications
- Forms
- Wiring Diagrams
- Special Tools
- 000 589 18 31 00 Brake Pedal Winch - WS40.00-P-0001B
- 222 589 00 09 00 Socket Wrench Bit - WS40.00-P-0003A
- 000 588 01 19 00 Tester - WS40.00-P-0005B
- 000 588 00 83 00 Tire Mounting Device - WS40.00-P-0006B
- 000 588 05 19 00 Vehicle Level Inclinometer - WS40.00-P-0007B
- 000 588 13 21 00 Wheel Alignment System - WS40.00-P-0013B
- 124 589 01 31 20 Spacing Pin - WS40.00-P-0015-01B
- 124 589 01 31 00 Quick Clamping Device - WS40.00-P-0015B
- 124 589 17 63 00 Assembly Tool - WS40.00-P-0021B
- 000 588 12 21 00 Balancing Machine - WS40.00-P-0024B
- 129 589 01 21 25 Clamping Nut (Complete) - WS40.00-P-0025-01B
- 129 589 01 21 00 Retainer Device - WS40.00-P-0025B
- 000 588 25 19 00 Tester - WS40.00-P-0032B
- 211 589 00 31 00 Adapter For Brake Pedal Winch - WS40.00-P-0047B
- 230 589 00 99 01 Plug-In Reversible Ratchet - WS40.00-P-0061-01B
- 230 589 00 99 00 Set Of Torque Tools - WS40.00-P-0061B
- 211 589 06 23 00 Brake Pad Test Gauge - WS40.00-P-0066A
- 199 589 01 09 00 Socket Wrench - WS40.00-P-0068B
- 129 589 00 59 00 Removal Tool - WS40.00-P-0101B
- 000 588 06 22 00 Service Software CD - WS40.00-Z-0027KOB