LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> C300 4Matic, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 312 (Wheels, Chassis Alignment Check - 253 Chassis 2 Of 2) >> Testing & Repair >> Attaching Mercedes-Benz Quick-Clamping Devices - AR40.20-P-0230SX

Attaching Mercedes-Benz Quick-Clamping Devices - AR40.20-P-0230SX

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 117, 118, 156, 166, 167, 172, 176, 177, 190, 197, 204, 205, 206, 207, 212, 213, 216, 217, 218, 221.0/1, 222, 223, 232, 242, 243, 246, 247, 253, 292, 293, 295, 297 

Model 463 

as of model year 2019 

Shown on model 221 

G13658041Courtesy of MERCEDES-BENZ USA

Shown on model 221 

G14547588Courtesy of MERCEDES-BENZ USA
  Attach/remove     
1 Attach quick clamping devices (01) to front and rear wheels and remove tensioning levers IMPORTANT Center mounting bell relative to wheel hub or rear axle shaft flange by locating the check pins in the five mounting holes (arrows) in the disk wheel.
SPECIAL TOOL Quick clamping device
Fig 1
2 Attach wheel mirrors or measurement pickups    
Fig 1: Identifying Quick Clamping Device (124 589 01 31 00)
G13658043Courtesy of MERCEDES-BENZ USA