Wiring Diagram For Tire Pressure Monitor Control Unit - PE40.15-P-2101-97FBA
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205 up to model year 2019
with code 475 (Tire pressure monitoring system)
Control unit N88
Model 253 (except 253.99) up to model year 2020
with code 475 (Tire pressure monitoring system)
Control unit N88
| Code: | Designation: | Position: |
|---|---|---|
| AO | Use of wiring diagrams | 15L |
| A69/1 | Left front tire pressure sensor | 9L |
| A69/2 | Right front tire pressure sensor | 10L |
| A69/3 | Left rear tire pressure sensor | 11L |
| A69/4 | Right rear tire pressure sensor | 12L |
| CAN HMI | User interface CAN | 7K |
| F1/3 | Right A-pillar fuse box | 3L |
| F1/3f341 | Fuse 341 | 1K |
| N88 | Tire pressure monitor control unit | 5A |
| W3/8 | Right rear wheel well ground point | 3F |
| W7 | Right wheel house trunk ground point | 5F |
| X30/20 | User interface CAN (CAN HMI) potential distributor electrical connector | 7L |