Testing and repair work: Passenger cars: Interior equipment - AR68.00-Z-9208AA
MODEL 208
| Removing and installing instrument panel | MODEL 208 | AR68.10-P-1000K | |
| Removing and installing side air nozzle | MODEL 208 | AR68.10-P-1100K | |
| Removing and installing center air nozzle | MODEL 208 | AR68.10-P-1150K | |
| Removing and installing trim strip on instrument panel | MODEL 202, 208 ... | AR68.10-P-1180E | |
| Removing and installing lock cylinder on glove compartment lid | MODEL 208 | AR68.10-P-1250K | |
| Adjusting glove compartment lid | MODEL 208 | AR68.10-P-1300K | |
| Removing and installing glove compartment | MODEL 208 | AR68.10-P-1400K | |
| Removing and installing cover below instrument panel (left) | MODEL 208 | AR68.10-P-1500K | |
| Removing and installing bottom section of instrument panel on driver's side | MODEL 208 | AR68.10-P-1505K | |
| Removing and installing bottom section of instrument panel on passenger side | MODEL 208 | AR68.10-P-1507K | |
| Removing and installing cover below instrument panel (right) | MODEL 208 | AR68.10-P-1520K | |
| Removing and installing center console | MODEL 208 | AR68.20-P-2000K | |
| Removing and installing cover frame in center console | MODEL 208 | AR68.20-P-2005K | |
| Cutting switch openings in cover | MODEL 140, 170, 202, 208, 210, 463 | AR68.20-P-2030A | |
| Disassembling and reassembling center console | MODEL 208 | AR68.20-P-2150K | |
| Removing and installing cover at gearshift lever | MODEL 208 | AR68.20-P-2310K | |
| Removing and installing cover on center console | MODEL 208 | AR68.20-P-2350K | |
| Removing and installing ashtray housing at front of center console | MODEL 208 | AR68.20-P-2400K | |
| Removing and installing spectacles or cassette compartment | MODEL 208 | AR68.20-P-2450K | |
| Removing and installing control cable for soft top compartment cover rear paneling | MODEL 208.435 /444 /445 /447 /448 /465 /470 | AR68.30-P-1650KA | |
| Removing and installing headliner of soft top | MODEL 208.435 /444 /445 /447 /448 /465 /470 | AR68.30-P-1770KA | |
| Removing and installing paneling on A-pillar | MODEL 208.3 /4 | AR68.30-P-4050K | |
| Removing and installing paneling from upper windshield | MODEL 208.435 /444 /445 /447 /448 /465 /470 | AR68.30-P-4250KA | |
| Removing and installing headliner | MODEL 208.3 | AR68.30-P-4300K | |
| Removing and installing soft top paneling | MODEL 208.448 /444 /470 /445 /435 /447 /465 | AR68.30-P-4320KA | |
| Removing and installing lining on C-pillar | MODEL 208.3 | AR68.30-P-4490K | |
| Removing, disassembling and installing rear shelf | MODEL 208.3 | AR68.30-P-4580K | |
| Remove/install B-pillar paneling | MODEL 208.3 | AR68.30-P-4700K | |
| Removing and installing side paneling in rear | MODEL 208.3 | AR68.30-P-4780K | |
| Removing and installing side paneling in rear | MODEL 208.435 /444 /445 /447 /448 /465 /470 | AR68.30-P-4780KA | |
| Removing and installing inside rearview mirror | MODEL 208.435 /444 /445 /447 /448 /465 /470 | AR68.40-P-0001KA | |
| Removing and installing retractable draft stop | MODEL 208.435 /444 /445 /447 /448 /465 /470 | AR68.50-P-1000KA | |
| Removing and installing retractable trunk partition | MODEL 208.435 /444 /445 /447 /448 /465 /470 | AR68.50-P-3000KA | |
| Removing and installing electric scissors-type sun shade for rear window | MODEL 208.3 with CODE (540a) Electric sun shade for rear window | AR68.50-P-4600K | |
| Removing and installing sun visor | MODEL 208.435 /444 /445 /447 /448 /465 /470 | AR68.60-P-5480KA | |
| Removing and installing rear mounting wall | MODEL 208.435 /444 /445 /447 /448 /465 /470 | AR68.74-P-1000KA |