Cover, Instrument Panel: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Partial install the instrument panel cover into the vehicle access and connect the passenger side airbag harness.
- Install the 23 instrument panel cover fasteners.
- Install the passenger air bag. Refer to AIR BAG, PASSENGER, INSTALLATION
.
- Install the instrument panel storage bin. Refer to BIN, INSTRUMENT PANEL, INSTALLATION .
- Install the glove box from the instrument panel. Refer to GLOVE BOX, INSTRUMENT PANEL, INSTALLATION .
- Install the right distribution register. Refer to OUTLET, AIR, INSTALLATION
.
- Install the center instrument panel speaker and sun sensor. Refer to SPEAKER, INSTALLATION .
- Install the left and right instrument panel speakers. Refer to SPEAKER, INSTALLATION
.
- Install the headlamp switch / left distribution register. Refer to SWITCH, HEADLAMP, INSTALLATION .
- Install the parking brake lever bezel.
- Install the instrument cluster. Refer to INSTALLATION
.
- Install the instrument panel cluster bezel. Refer to BEZEL, INSTRUMENT CLUSTER, INSTALLATION .
- Install right and left power outlets and bezels.
- Install the radio. Refer to RADIO, INSTALLATION .
- Install the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, INSTALLATION .
- Install fence line bolt access covers.
- Install fence line bolts.
- Install the defroster grilleNOTE:
Right side shown in the illustration left side similar.
- Install the left and right A-pillar trim. Refer to PANEL, A-PILLAR TRIM, WITH GRAB HANDLE, INSTALLATION .
- Install the Lower Center Bezel.
- Install the floor console, if equipped. Refer to CONSOLE, FLOOR, LID, INSTALLATION .
- Install the WIC Module and install the WIC Module fasteners.
- Connect the WIC Module electrical connectors.
- Install the steering column as necessary. Refer to COLUMN, INSTALLATION .
- Install the steering column opening cover Refer to COVER, STEERING COLUMN OPENING, INSTALLATION .
- Connect the negative battery cable.