Cover, Steering Column Opening: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Connect necessary wire harness connectors.
- Position the steering column opening cover (2) to the instrument panel and fully engage the retainer clips to the instrument panel.
- Install the Data Link Connector (3) to the steering column opening cover (2) by pushing the connector through the opening on the back side of the cover and fully engaging the lock tabs (1) of the connector.
- Install the two fasteners (2) that secure the steering column opening cover (1) to the instrument panel.
- Position the hood release hand onto the column opening cover and fully engage the retainer clip that secures the hood release handle to the steering column opening cover.