Bezel, Instrument Panel, Center: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Position the instrument panel center bezel near the instrument panel and connect the wire harness connectors (1).
- Install the instrument panel center bezel onto the instrument panel and fully engage the retainer clips (2).
- If equipped with the 115 V power outlet (2), install the fastener (1) inside the lower right tray above the outlet.
- Install the two fasteners (1) to the upper tray.
- If equipped with the 115 V power outlet (4), install the lower right (3) center bezel tray liner.
- Install the upper (1) center bezel tray liner.
- If equipped, install the center console bezel. Refer to BEZEL, CENTER CONSOLE, INSTALLATION .
- Connect the negative battery cable.