Section 38 (Audio Systems - Coupe)
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Radio And Tape Player
- Radio With Tape Player And Cd Player, Speaker And Antenna Diagnosis
- Introduction To Audio System Diagnosis
- Troubleshooting Strategy
- Symptom Chart
- Symptom Procedures
- INSPECTION PROCEDURE 1: Power of radio and CD player does not turn ON when the ignition switch is in the "ACC" position or "ON" position.
- INSPECTION PROCEDURE 2: No Sound. < Vehicles with Amplifier >
- INSPECTION PROCEDURE 3: No Sound from One Speaker. < Vehicle without Amplifier >
- INSPECTION PROCEDURE 4: No Sound from One Speaker. < Vehicles with Amplifier >
- INSPECTION PROCEDURE 5: Noise: Noise appears at certain places when traveling (AM).
- INSPECTION PROCEDURE 6: Noise: Noise appears at certain places when traveling (FM).
- INSPECTION PROCEDURE 7: Noise: Mixed with noise, only at night (AM).
- INSPECTION PROCEDURE 8: Noise: Broadcasts can be heard but both AM and FM have a lot of noise.
- INSPECTION PROCEDURE 9: Noise: There is more noise on either AM or FM.
- INSPECTION PROCEDURE 10: Noise: There is noise when starting the engine.
- INSPECTION PROCEDURE 11: Noise: Some noise appears when there is vibration or shocks during traveling.
- INSPECTION PROCEDURE 12: Noise: Noise sometimes appears on FM during traveling.
- INSPECTION PROCEDURE 13: Noise: Ever-present noise.
- INSPECTION PROCEDURE 14: Radio: There is noise but no reception for both AM and FM or no sound from AM, or no sound from FM.
- INSPECTION PROCEDURE 15: Radio: Poor reception.
- INSPECTION PROCEDURE 16: Radio: Distortion on AM or on both AM and FM.
- INSPECTION PROCEDURE 17: Radio: Distortion on FM only.
- INSPECTION PROCEDURE 18: Radio: Using the auto select function, too few automatic stations are selected.
- INSPECTION PROCEDURE 19: Radio: Preset stations are erased.
- INSPECTION PROCEDURE 20: Tape Player: Cassette tape can not be inserted.
- INSPECTION PROCEDURE 21: Tape Player: Sound quality is poor, or sound is weak.
- INSPECTION PROCEDURE 22: Tape Player: Cassette tape can not be ejected.
- INSPECTION PROCEDURE 23: Tape Player: Uneven revolution. Tape speed is fast or slow.
- INSPECTION PROCEDURE 24: Tape Player: Automatic search does not work.
- INSPECTION PROCEDURE 25: Tape Player: Malfunction of the auto reverse.
- INSPECTION PROCEDURE 26: Tape Player: Tape gets caught in mechanism.
- INSPECTION PROCEDURE 27: CD Player: CD can not be Inserted.
- INSPECTION PROCEDURE 28: CD Player: No sound. (CD only)
- INSPECTION PROCEDURE 29: CD Player: CD sound skips.
- INSPECTION PROCEDURE 30: CD Player: Sound quality is poor.
- INSPECTION PROCEDURE 31: CD Player: CD can not be ejected.
- Special Tools
- Removal And Installation
- Radio With Tape Player And Cd Player, Speaker And Antenna Diagnosis
- Speaker
- Amplifier
- Antenna
- Specifications