Installing windshield
- Prepare the standard tool.
Standard tool:
Cordless cartridge gun
Cordless cartridge gun
81 49 2 405 782
- Prepare the adhesive.
ADHESIVE SPECIFICATION
| Window glass adhesive (single cartridge) | 300 ml, Rest of World | 83192289286 |
| 300 ml, USA | 83192289181 | |
| 300 ml, CHN | 83192180002 |
- Use the C nozzle.
TECHNICAL DATA SPECIFICATION
| C-nozzle | ||
|---|---|---|
| For windshields, rear windows, and body-specific side window glass | Diameter A | 7.5 +1-1 min |
| Height B | 13 +1-1 mm | |
CONSUMABLE SPECIFICATION
| C-nozzle | 83192155589 |
- Apply adhesive bead inside the marks (1) perpendicular to the windscreen.
- Coat bead joint.
- Carefully feed in the windshield with the special tool 0 492 609 (51 3 010) between the hood and the windshield panel.
- Fit the windshield at top.
- Evenly align the windshield at left and right.
- Fit the windshield at the bottom and press.
- Press the windshield upward until the rubber frame of the windshield evenly makes contact with the roof.
- Secure the windshield in this installation position with yellow plastic adhesive tapes (1) .
CONSUMABLE SPECIFICATION
| Plastic adhesive tape | 83195B3DD17 |
TECHNICAL DATA SPECIFICATION
| Gap dimension windshield to roof outer skin | ||
|---|---|---|
| 1 windshield; 2 roof outer skin | a | 3.8 +1.2-1.2 mm |
| b | 2.5 +2-2.1 mm | |
Follow-up work
- Refer to CONNECTING CONNECTOR TO THE RAIN-LIGHT-SOLAR-CONDENSATION SENSOR .
- Refer to INSTALLING THE ADCAM CAMERA (BASIC VERSION) .
- Refer to INSTALLING THE ADCAM CAMERA (MID VARIANT/HIGH-END VERSION) WITH THE LENS HOOD .
- Refer to INSTALLING THE INTERIOR REARVIEW MIRROR .
- Refer to INSTALLING THE COVERS FOR THE INTERIOR MIRROR .
- Refer to INSTALLING A-PILLAR TRIM PANEL ON THE LEFT AND RIGHT .
- Refer to INSTALLING THE A-PILLAR TRIM PANEL AT THE CENTER LEFT AND RIGHT .
- Refer to INSTALLING THE SIDE COVER ON THE DASHBOARD AT LEFT AND RIGHT .
- Refer to INSTALLING THE COMPLETE COWL COVER .
- Refer to INSTALLING GUTTER STRIP ON THE WINDSHIELD .
- Refer to CALIBRATING THE ADCAM CAMERA .
- Refer to CLOSING THE ENGINE COMPARTMENT LID .