Installing the trim on the bumper cover (M Aerodynamics package)
- Position the trim (1) on the detents (arrows) and clip it in.
Follow-up work
- Refer to INSTALLING THE REINFORCEMENT FOR THE BUMPER COVER (M AERODYNAMICS PACKAGE) .
- Refer to INSTALLING THE SUPPORT AT THE BOTTOM CENTER (M AERODYNAMICS PACKAGE) .
- Refer to INSTALLING THE FRONT BUMPER COVER .
- Refer to INSTALLING THE FRONT ORNAMENTAL GRILLE/RADOME .
- Refer to INSTALLING THE FRONT RADIATOR GRILL FRAME .
- Refer to INSTALLING THE NUMBER PLATE BASEPLATE FOR THE LICENSE PLATE AT THE FRONT .
- Refer to INSTALLING THE FRONT SECTION OF THE FRONT WHEEL ARCH COVER ON THE LEFT AND RIGHT .
- Refer to CLOSING THE ENGINE COMPARTMENT LID .
- Refer to PUTTING THE FRONT RADAR SENSORS INTO OPERATION .