Diagnostic Trouble Codes (ACTIVEHYBRID) - DTC P144B, BMW DTC 193208 Through DTC P060C, BMW DTC 200C08

• DTC P144B, BMW DTC 193208: Tank fill level, plausibility: implausible in relation to consumption value
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0692, BMW DTC 1A2001: Electric fan, activation: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0691, BMW DTC 1A2002: Electric fan, activation: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0480, BMW DTC 1A2004: Electric fan, activation: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P14C0, BMW DTC 1A2108: Electric fan, self-diagnosis, stage 1: Minor fan fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P14C0, BMW DTC 1A2308: Electric fan, self-diagnosis, stage 2: fan fault with potential danger to fan
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P14C0, BMW DTC 1A2408: Electric fan, self-diagnosis, stage 3: fan fault with restricted motor function
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P14C0, BMW DTC 1A2508: Electric fan, self-diagnosis, stage 4: serious fan fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P144E, BMW DTC 1A2601: Cut-off relay, electric fan, actuation: Short circuit to B+
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P144D, BMW DTC 1A2602: Cut-off relay, electric fan, actuation: Short to earth
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P144C, BMW DTC 1A2604: Cut-off relay, electric fan, actuation: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P144F, BMW DTC 1A2708: Electric fan cutout relay, plausibility: Fault when the relay is switched on and off
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0500, BMW DTC 1B0004: Vehicle speed, signal: no signal
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0503, BMW DTC 1B0108: Vehicle speed, plausibility: signal implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15DA, BMW DTC 1B0B01: none
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15DB, BMW DTC 1B0C01: none
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15DC, BMW DTC 1B0D01: none
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15DD, BMW DTC 1B0E01: none
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1667, BMW DTC 1B2002: EWS anti-tampering protection: no starting value programmed
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16CF, BMW DTC 1B2008: EWS anti-tampering protection: expected response implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P165A, BMW DTC 1B2101: Interface EWS-DME: hardware fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1660, BMW DTC 1B2102: Interface EWS-DME: frame fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1661, BMW DTC 1B2104: Interface EWS-DME: timeout
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P165B, BMW DTC 1B2108: Interface EWS-DME: checksum fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P165C, BMW DTC 1B2201: DME, internal fault, EWS data: no available memory possibility
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P165D, BMW DTC 1B2202: DME, internal fault, EWS data: fault-activation-code storage
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1668, BMW DTC 1B2204: DME, internal fault, EWS data: starting value destroyed/2-from 3-selection failed
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P165E, BMW DTC 1B2208: DME, internal fault, EWS data: checksum fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1166, BMW DTC 1B2302: Message, EWS-DME, incorrect: frame fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U0167, BMW DTC 1B2304: Message, EWS-DME, incorrect: timeout
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15B0, BMW DTC 1B5001: Monitoring, terminal 15: wake-up line, short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15B1, BMW DTC 1B5002: Monitoring, terminal 15: wake-up line, short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15B2, BMW DTC 1B5004: Monitoring, terminal 15: no message from CAS or message incorrect
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15B3, BMW DTC 1B5008: Monitoring, terminal 15: signal, wake-up line implausible in relation to message, CAS terminal status
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15B0, BMW DTC 1B5101: Terminal 15_3, line from CAS, electrical: Short circuit to B+
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15B1, BMW DTC 1B5102: Terminal 15_3, line from CAS, electrical: Short to earth or open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1551, BMW DTC 1B9004: Engine switch-off time: timeout or invalidity value
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1515, BMW DTC 1B9008: Engine switch-off time: signal implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2610, BMW DTC 1B9104: Engine shutdown time: Signal implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15E8, BMW DTC 1B9508: Engine switch-off time, plausibility: time too short in correlation to engine-coolant cooling
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15E9, BMW DTC 1B960)8: Engine switch-off time, plausibility: time too long in correlation to engine-coolant cooling
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2299, BMW DTC 1BAF08: Accelerator-pedal module and brake pedal, plausibility: pedal values implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0520, BMW DTC 1C3204: Engine-oil pressure switch: open circuit or switch sticking
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P250F, BMW DTC 1C4002: Engine-oil level: too low
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P250F, BMW DTC 1C4102: Engine-oil level: too low
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1586, BMW DTC 1C5001: Oil-condition sensor: temperature measurement
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1587, BMW DTC 1C5002: Oil-condition sensor: level measurement
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1521, BMW DTC 1C5004: Oil-condition sensor: communication fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1588, BMW DTC 1C5008: Oil-condition sensor: permittivity fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15B4, BMW DTC 1C5008: Oil-condition sensor: permittivity fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P252A, BMW DTC 1C5104: Oil-condition sensor, communication: no communication
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0128, BMW DTC 1D2008: Map thermostat, mechanical: jammed open
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0597, BMW DTC 1D2204: none
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0599, BMW DTC 1D2301: none
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0599, BMW DTC 1D2401: Map thermostat, activation: Short circuit to B+
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0598, BMW DTC 1D2402: Map thermostat, activation: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0597, BMW DTC 1D2404: Map thermostat, activation: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0507, BMW DTC 1E0001: Idle-speed control: speed too high
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0506, BMW DTC 1E0002: Idle-speed control: speed too low
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1562, BMW DTC 1E0101: Idle speed control, cold start: Engine speed too high
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1561, BMW DTC 1E0102: Idle speed control, cold start: Engine speed too low
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0604, BMW DTC 1F0001: DME, internal fault, RAM: RAM chip
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0604, BMW DTC 1F0002: DME, internal fault, RAM: safety computer RAM
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16A0, BMW DTC 1F0101: DME, internal fault, checksum: boot software
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16A1, BMW DTC 1F0102: DME, internal fault, checksum: application software
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16A2, BMW DTC 1F0104: DME, internal fault, checksum: data area
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16A3, BMW DTC 1F0201: DME, internal fault, NVMY checksum: NVMY check
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16A4, BMW DTC 1F0304: DME, internal fault, knock-sensor chip: timeout, SPI bus
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16A5, BMW DTC 1F0404: DME, internal fault, multiple-output-stage chip: timeout, SPI bus
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0687, BMW DTC 1F0501: Terminal 15N from CAS, signal: not switched off
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0686, BMW DTC 1F0502: Terminal 15N from CAS, signal: not switched
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16C5, BMW DTC 1F0601: Terminal 15N from CAS, switching delay: switches too late
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3287, BMW DTC 1F2004: No coding: Coding data error in EEPROM
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3239, BMW DTC 1F2008: No coding: No coding after programming
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3288, BMW DTC 1F2104: Incorrect data record: CAN timeout
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3289, BMW DTC 1F2108: Incorrect data record: variant monitoring
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10A5, BMW DTC 1F2201: Injectors, group 1, or DME, internal fault: initialization fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10A6, BMW DTC 1F2202: Injectors, group 1, or DME, internal fault: connection fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10A7, BMW DTC 1F2204: Injectors, group 1, or DME, internal fault: discharge fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10A8, BMW DTC 1F2301: Injectors, group 2, or DME, internal fault: initialization fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10A9, BMW DTC 1F2302: Injectors, group 2, or DME, internal fault: connection fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10AA, BMW DTC 1F2304: Injectors, group 2, or DME, internal fault: discharge fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10BA, BMW DTC 1F2401: Injectors, group 3, or DME, internal fault: initialization fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10BB, BMW DTC 1F2402: Injectors, group 3, or DME, internal fault: connection fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10BC, BMW DTC 1F2404: Injectors, group 3, or DME, internal fault: discharge fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10BD, BMW DTC 1F2501: Injectors, group 4, or DME, internal fault: initialization fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10BE, BMW DTC 1F2502: Injectors, group 4, or DME, internal fault: connection fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10BF, BMW DTC 1F2504: Injectors, group 4, or DME, internal fault: discharge fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P164C, BMW DTC 1F3008: Accelerator-pedal module, internal fault, channel 1: voltage regulator
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1625, BMW DTC 1F3108: Accelerator-pedal module, internal fault, channel 2: voltage regulator
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15B7, BMW DTC 1F4001: Automatic starting device, activation: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15B6, BMW DTC 1F4002: Automatic starting device, activation: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0512, BMW DTC 1F4004: Automatic starting device, activation: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10C3, BMW DTC 1F4C01: Relay, quantity control valve: Short circuit to B+
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10C2, BMW DTC 1F4C02: Relay, quantity control valve: Short to earth
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10C1, BMW DTC 1F4C04: Relay, quantity control valve: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0669, BMW DTC 1F5001: DME, internal fault, interior-temperature sensor, electric: short circuit to positive or open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0668, BMW DTC 1F5002: DME, internal fault, interior-temperature sensor, electric: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P168F, BMW DTC 200002: DME, internal fault, monitoring cruise control: ACC monitoring
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P166A, BMW DTC 200004: DME, internal fault, monitoring cruise control: LDM monitoring
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16A9, BMW DTC 200108: DME, internal fault, monitoring engine speed: malfunction
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16C2, BMW DTC 200208: DME, internal fault, monitoring engine-speed limitation: malfunction
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16B0, BMW DTC 200308: DME, internal fault, monitoring accelerator-pedal module: malfunction
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16B1, BMW DTC 200404: DME, internal fault, monitoring idle-speed control: request, I component, implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16B2, BMW DTC 200408: DME, internal fault, monitoring idle-speed control: request, PD component, implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16B3, BMW DTC 200501: DME, internal fault, monitoring external torque request: request, MSR, implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16C9, BMW DTC 200502: DME, internal fault, monitoring external torque request: request, ICM, implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1603, BMW DTC 200504: DME, internal fault, monitoring external torque request: transmit signals implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16B6, BMW DTC 200508: DME, internal fault, monitoring external torque request: request, EGS, implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16B7, BMW DTC 200601: DME, internal fault, monitoring setpoint torque: maximum clutch torque implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16B8, BMW DTC 200602: DME, internal fault, monitoring setpoint torque: minimum clutch torque implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16B9, BMW DTC 200604: DME, internal fault, monitoring setpoint torque: loss torque implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16C1, BMW DTC 200708: DME, internal fault, monitoring actual torque: signal implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16CE, BMW DTC 200808: DME, internal fault, monitoring hardware: malfunction
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P323F, BMW DTC 200908: DME, internal fault, monitoring fuel quantity: ratio lambda air mass to fuel quantity, correlation fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P060E, BMW DTC 200A08: DME, internal fault, monitoring throttle valve: malfunction
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0605, BMW DTC 200C01: DME, internal fault, control-unit fault, internal monitoring: ROM error
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0604, BMW DTC 200C02: DME, internal fault, control-unit fault, internal monitoring: RAM error
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0606, BMW DTC 200C04: DME, internal fault, control-unit fault, internal monitoring: computer monitoring; general composite fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P060C, BMW DTC 200C08: DME, internal fault, control-unit fault, internal monitoring: host-computer monitoring; operations-set fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction