Diagnostic Trouble Codes (ACTIVEHYBRID) - DTC P0040, BMW DTC 128008 Through DTC P300F, BMW DTC 138904

• DTC P0040, BMW DTC 128008: Oxygen sensors before catalytic converter, mounting: mixed up
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2195, BMW DTC 128101: Oxygen sensor before catalytic converter, system check: Signal, constantly lean
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2197, BMW DTC 128201: Oxygen sensor before catalytic converter 2, system check: Signal, constantly lean
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2196, BMW DTC 128301: Oxygen sensor before catalytic converter, system check: Signal, constantly rich
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2198, BMW DTC 128401: Oxygen sensor before catalytic converter 2, system check: Signal, constantly rich
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2297, BMW DTC 128501: Oxygen sensor before catalytic converter, in coasting/overrun mode: Signal outside limit value
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2298, BMW DTC 128601: Oxygen sensor before catalytic converter 2, in overrun mode: Signal outside limit value
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0133, BMW DTC 128901: Oxygen sensor before catalytic converter, dynamic response: slow response
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0133, BMW DTC 128902: Oxygen sensor before catalytic converter, dynamics: Slow response
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0153, BMW DTC 128A01: Oxygen sensor before catalytic converter 2, dynamic response: slow response
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0153, BMW DTC 128A02: Oxygen sensor before catalytic converter 2, dynamics: Slow response
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2414, BMW DTC 128B01: Oxygen sensor before catalytic converter, installation: sensor not connected
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2415, BMW DTC 128C01: Oxygen sensor before catalytic converter 2, installation: sensor not connected
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2243, BMW DTC 128E01: Oxygen sensor before catalytic converter, line fault: open circuit, Nernst line
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P112C, BMW DTC 128E02: Oxygen sensor before catalytic converter, line fault: Open circuit, virtual earth or pump power supply line
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P112C, BMW DTC 128E04: Oxygen sensor before catalytic converter, line fault: Open circuit, virtual earth or pump power supply line
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2247, BMW DTC 128F01: Oxygen sensor before catalytic converter 2, line fault: open circuit, Nernst line
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P112D, BMW DTC 128F02: Oxygen sensor before catalytic converter 2, line fault: Open circuit, virtual earth or pump power supply line
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P112D, BMW DTC 128F04: Oxygen sensor before catalytic converter 2, line fault: Open circuit, virtual earth or pump power supply line
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0132, BMW DTC 129001: Oxygen sensor before catalytic converter, signal lines: Short circuit to B+
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0131, BMW DTC 129002: Oxygen sensor before catalytic converter, signal lines: Short to earth
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0152, BMW DTC 129101: Oxygen sensor before catalytic converter 2, signal lines: Short circuit to B+
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0151, BMW DTC 129102: Oxygen sensor before catalytic converter 2, signal lines: Short to earth
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3024, BMW DTC 129201: DME, internal fault, oxygen sensor before catalytic converter: initialization fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3022, BMW DTC 129202: DME, internal fault, oxygen sensor before catalytic converter: communication fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3025, BMW DTC 129301: DME, internal fault, oxygen sensor before catalytic converter 2: initialization fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3023, BMW DTC 129302: DME, internal fault, oxygen sensor before catalytic converter 2: communication fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0041, BMW DTC 12A008: Oxygen sensors after catalytic converter, mounting: mixed up
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2271, BMW DTC 12A101: Oxygen sensor after catalytic converter, system check: Signal, constantly rich
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2270, BMW DTC 12A102: Oxygen sensor after catalytic converter, system check: Signal, constantly lean
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2273, BMW DTC 12A201: Oxygen sensor after catalytic converter 2, system check: Signal, constantly rich
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2272, BMW DTC 12A202: Oxygen sensor after catalytic converter 2, system check: Signal, constantly lean
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P013A, BMW DTC 12A308: Oxygen sensor after catalytic converter, dynamic response, from rich to lean: slow response
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P013C, BMW DTC 12A408: Oxygen sensor after catalytic converter 2, dynamic response, from rich to lean: slow response
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0138, BMW DTC 12A701: Oxygen sensor after catalytic converter, signal: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0158, BMW DTC 12A801: Oxygen sensor after catalytic converter 2, signal: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0137, BMW DTC 12A902: Oxygen sensor after catalytic converter, signal: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0157, BMW DTC 12AA02: Oxygen sensor after catalytic converter 2, signal: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0136, BMW DTC 12AB04: Oxygen sensor after catalytic converter, signal: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0140, BMW DTC 12AB04: Oxygen sensor after catalytic converter, signal: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0156, BMW DTC 12AC04: Oxygen sensor after catalytic converter 2, signal: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0160, BMW DTC 12AC04: Oxygen sensor after catalytic converter 2, signal: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P013E, BMW DTC 12AF08: Oxygen sensor after catalytic converter, trailing throttle, from rich to lean: delayed response
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P014A, BMW DTC 12B008: Oxygen sensor after catalytic converter 2, trailing throttle, from rich to lean: delayed response
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0032, BMW DTC 12B101: Oxygen-sensor heater before catalytic converter, activation: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0031, BMW DTC 12B102: Oxygen-sensor heater before catalytic converter, activation: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0030, BMW DTC 12B104: Oxygen-sensor heater before catalytic converter, activation: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0052, BMW DTC 12B201: Oxygen-sensor heater before catalytic converter 2, activation: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0051, BMW DTC 12B202: Oxygen-sensor heater before catalytic converter 2, activation: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0050, BMW DTC 12B204: Oxygen-sensor heater before catalytic converter 2, activation: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0038, BMW DTC 12B301: Oxygen-sensor heater after catalytic converter, activation: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0037, BMW DTC 12B302: Oxygen-sensor heater after catalytic converter, activation: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0036, BMW DTC 12B304: Oxygen-sensor heater after catalytic converter, activation: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0058, BMW DTC 12B401: Oxygen-sensor heater after catalytic converter 2, activation: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0057, BMW DTC 12B402: Oxygen-sensor heater after catalytic converter 2, activation: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0056, BMW DTC 12B404: Oxygen-sensor heater after catalytic converter 2, activation: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0135, BMW DTC 12B501: Oxygen sensor heating before catalytic converter, function: Normal operating temperature not reached
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3026, BMW DTC 12B501: Oxygen sensor heating before catalytic converter, function: Normal operating temperature not reached
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P305D, BMW DTC 12B502: Oxygen sensor heating before catalytic converter, function: Operating temperature not reached during warm-up
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P165F, BMW DTC 12B504: Oxygen-sensor heater before catalytic converter, function: sensor-temperature measurement in ECU failed
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0155, BMW DTC 12B601: Oxygen sensor heating before catalytic converter 2, function: Normal operating temperature not reached
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3027, BMW DTC 12B601: Oxygen sensor heating before catalytic converter 2, function: Normal operating temperature not reached
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P305E, BMW DTC 12B602: Oxygen sensor heating before catalytic converter 7-12, function: Operating temperature not reached during warmup
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P166F, BMW DTC 12B604: Oxygen-sensor heater before catalytic converter 2, function: sensor-temperature measurement in ECU failed
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0141, BMW DTC 12B701: Oxygen-sensor heater after catalytic converter, function: internal resistance too high
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0161, BMW DTC 12B801: Oxygen-sensor heater after catalytic converter 2, function: internal resistance too high
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3026, BMW DTC 12B901: Oxygen sensor before catalytic converter, temperature: Normal operating temperature not reached
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P305D, BMW DTC 12B902: Oxygen sensor before catalytic converter, temperature: Operating temperature not reached during warm-up
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P165F, BMW DTC 12B904: Oxygen sensor before catalytic converter, temperature: sensor-temperature measurement in ECU failed
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3027, BMW DTC 12BA01: Oxygen sensor before catalytic converter 2, temperature: Normal operating temperature not reached
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P305E, BMW DTC 12BA02: Oxygen sensor before catalytic converter 2, temperature: Operating temperature not reached during warm-up
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P166F, BMW DTC 12BA04: Oxygen sensor before catalytic converter 2, temperature: sensor-temperature measurement in ECU failed
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P013B, BMW DTC 12BE08: Oxygen sensor after catalytic converter, dynamic response, from lean to rich: slow response
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P013D, BMW DTC 12BF08: Oxygen sensor after catalytic converter 2, dynamic response, from lean to rich: slow response
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2089, BMW DTC 130001: VANOS solenoid valve, inlet, activation: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2088, BMW DTC 130002: VANOS solenoid valve, inlet, activation: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0010, BMW DTC 130004: VANOS solenoid valve, inlet, activation: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0012, BMW DTC 130108: VANOS, inlet: control fault, position not reached
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2091, BMW DTC 130201: VANOS solenoid valve, exhaust, activation: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2090, BMW DTC 130202: VANOS solenoid valve, exhaust, activation: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0013, BMW DTC 130204: VANOS solenoid valve, exhaust, activation: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0015, BMW DTC 130308: VANOS, exhaust: control fault, position not reached
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2093, BMW DTC 130401: VANOS solenoid valve, inlet 2, activation: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2092, BMW DTC 130402: VANOS solenoid valve, inlet 2, activation: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0020, BMW DTC 130404: VANOS solenoid valve, inlet 2, activation: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0022, BMW DTC 130508: VANOS, inlet 2: control fault, position not reached
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2095, BMW DTC 130601: VANOS solenoid valve, exhaust 2, activation: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2094, BMW DTC 130602: VANOS solenoid valve, exhaust 2, activation: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0023, BMW DTC 130604: VANOS solenoid valve, exhaust 2, activation: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0025, BMW DTC 130708: VANOS, exhaust 2: control fault, position not reached
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13BA, BMW DTC 130801: Inlet camshaft, position monitoring: tooth jump
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13BC, BMW DTC 130901: Exhaust camshaft, position monitoring: tooth jump
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13BB, BMW DTC 130A01: Inlet camshaft 2, position monitoring: tooth jump
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13BD, BMW DTC 130B01: Exhaust camshaft 2, position monitoring: tooth jump
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13B4, BMW DTC 130C01: Crankshaft - inlet camshaft, reference: angle difference outside limit value
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13B6, BMW DTC 130D01: Crankshaft - exhaust camshaft, reference: Angle difference within limit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0016, BMW DTC 130E01: Crankshaft - inlet camshaft, synchronization: camshaft signal outside limit value
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0017, BMW DTC 130F01: Crankshaft - exhaust camshaft, synchronization: camshaft signal outside limit value
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13B5, BMW DTC 131001: Crankshaft - inlet camshaft 2, reference: angle difference outside limit value
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13B7, BMW DTC 131101: Crankshaft - exhaust camshaft 2, reference: angle difference outside limit value
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0018, BMW DTC 131201: Crankshaft - inlet camshaft 2, synchronization: camshaft signal outside limit value
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0019, BMW DTC 131301: Crankshaft - exhaust camshaft 2, synchronization: camshaft signal outside limit value
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P054B, BMW DTC 131401: Text VANOS, exhaust, cold start: not controllable
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P054B, BMW DTC 131408: none
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P052B, BMW DTC 131501: VANOS, inlet, cold start: not controllable
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P052B, BMW DTC 131508: none
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P054D, BMW DTC 131601: VANOS, exhaust 2, cold start: not controllable
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P054D, BMW DTC 131608: none
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P052D, BMW DTC 131701: VANOS, inlet 2, cold start: not controllable
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P052D, BMW DTC 131708: none
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0478, BMW DTC 138101: Exhaust flap, activation: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0477, BMW DTC 138102: Exhaust flap, activation: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0475, BMW DTC 138104: Exhaust flap, activation: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P303E, BMW DTC 138201: Radiator shutter, top, supply voltage, actuator: voltage fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P303F, BMW DTC 138301: Radiator shutter, top, overtemperature, actuator: limit value exceeded
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P304A, BMW DTC 138401: Radiator shutter, top, actuator internal: electrical fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P304B, BMW DTC 138501: Radiator shutter, top, lower stop: not detected
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P304C, BMW DTC 138601: Radiator shutter, top, upper stop: not detected
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P304D, BMW DTC 138701: Radiator shutter, top, upper stop: detected too early
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P300D, BMW DTC 138901: Radiator shutter, bottom, electric: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P300E, BMW DTC 138902: Radiator shutter, bottom, electric: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P300F, BMW DTC 138904: Radiator shutter, bottom, electric: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction