Section 39 (Lubricating And Oil System - Removal, Replacement And Installation (644 Body))
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Lubrication System (B4204T2 CVVT; 2000)
- Oil pressure: Inspecting And Replacing the Oil Pressure Sensor
- Replacing oil pump, front retaining ring
- Notes
- Remove vibration damper
- Remove distributor wheel from the crankshaft
- If replacing the front retaining ring only
- Remove oil pump
- Dismantling oil pump
- Checking oil pressure governor spring
- Insert pump rotor in casing and check play/clearance
- Assemble the pump
- Installing oil pump
- Installing camshaft belt
- Installing vibration damper
- Install front wheel
- Replacing the Oil And Oil Filter
- Lubrication System (B4204T3; 2004)
- Lubrication System (B4204T3 (Ca) (Us); 2001-2003)
- Lubrication System (B4204T4; 2003-2004)
- Oil Capacity Engine S40/V40 (2000-2004)