Install front wheel
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Install the wheel and loosely install the nuts
- Tighten the nuts crosswise to 110 Nm
- Torque the nuts again by hand.
NOTE:
If tightening with an airgun, only use torque socket
9512661
.
NOTE:
Tightening the nuts crosswise and to the correct torque settings is important to avoid causing stresses in the brake disc.
Test-run the engine.