Engine - Cleaning, Inspection And Adjustment

• Crankshaft Axial Play (B5204T5; B5254T4; 2004-2007)
  • Crankshaft axial play
    • Notes
    • Removal
      • Notes
      • Remove the right front wheel
      • Remove the fuel line clamp
      • Measure the crankshaft nut or the oscillation damper inner ring
      • Crankshaft
      • Push in the crankshaft
    • Installation
      • Remove the test equipment
      • Installation
• Flywheel (B5204T5, M56; B5254T4, M66 AWD; 2004-2007)
  • Flywheel, checking
    • Flywheel, check
• Crankshaft Axial Play (B5234T3; 2001-2004)
  • Crankshaft axial play
• Flywheel (B5234T3, M56; 2002-2004)
  • Flywheel, checking
• Crankshaft Axial Play (B5244S; 2001-2005)
  • Crankshaft axial play
• Flywheel (B5244S, M56; 2001-2004)
  • Flywheel, checking
• Crankshaft Axial Play (B5244S6; 2003-2005)
  • Crankshaft axial play
• Crankshaft Axial Play (B5244T3; 2001-2003)
  • Crankshaft axial play
• Flywheel (B5244T3, M56; 2002-2003)
  • Flywheel, checking
• Crankshaft Axial Play (B5244T5; 2005-2009)
  • Crankshaft axial play
• Flywheel (B5244T5, M66; 2005-2008)
  • Flywheel, checking
• Crankshaft Axial Play (B5254T2; 2003-2009)
  • Crankshaft axial play
• Flywheel (B5254T2, M56; 2003-2007)
  • Flywheel, checking
• Flywheel (B5254T4, TF-80SC AWD; 2006-2007)
  • Flywheel, checking
• Cylinder Leakage (B5204T5; 2004)
  • Cylinder leakage test
    • General method description
      • The cylinders can be checked for leakage as an alternative to a compression test
      • How is the cylinder checked for leakage?
      • Fault-tracing
      • Check
      • Other information
• Cylinder Leakage (B5204T5; 2005-2007)
  • Cylinder leakage test
• Cylinder Leakage (B5234T3; 2001-2004)
  • Cylinder leakage test
• Cylinder Leakage (B5244S; 2001-2006)
  • Cylinder leakage test
• Cylinder Leakage (B5244S6; 2003-2006)
  • Cylinder leakage test
• Cylinder Leakage (B5244T3; 2001-2003)
  • Cylinder leakage test
• Cylinder Leakage (B5244T5; B5254T2; 2005-2009)
  • Cylinder leakage test
• Cylinder Leakage (B5254T2; 2003-2004)
  • Cylinder leakage test
• Cylinder Leakage (B5254T4; 2004-2007)
  • Cylinder leakage test
• Cylinder Leakage (B5254T4, TF-80SC AWD; 2006-2007)
  • Cylinder leakage test
• Valve Mechanism (B5204T5; B5254T4; 2004-2007)
  • Valve clearance
    • Notes
    • Preparation
    • Removing the timing belt
    • Removing the timing gear pulley
    • Removing the camshaft cover
    • Cleaning
    • Preparations
    • Installing the camshaft and tappet
    • Installing the camshaft press
    • Checking the valve clearance
    • Correcting measured clearance
    • When the correct valve clearance is reached
    • Installing tappets and camshafts
    • Applying liquid gasket
    • Installing the camshaft covers
    • Installing the rear camshaft seal
    • Installing the front camshaft seal
    • Fixing the crankshaft position
    • Installing and adjusting the VVT unit/timing gear pulley on the camshaft
    • Finishing
    • Check
• Valve Mechanism (B5234T3; B5244T3; 2001-2002)
  • Checking valve clearance
    • Notes
    • Preparation
    • Set the engine to the test position
    • Check the valve clearance
    • Next test measurement
    • Finishing
  • Valve clearance
    • Notes
    • Preparation
    • Removing the timing belt
    • Removing the timing gear pulley
    • Removing the camshaft cover
    • Cleaning
    • Preparations
    • Installing the camshaft and tappet
    • Installing the camshaft press
    • Checking the valve clearance
    • Correcting measured clearance
    • When the correct valve clearance is reached
    • Installing tappets and camshafts
    • Applying liquid gasket
    • Installing the camshaft covers
    • Installing the rear camshaft seal
    • Installing the front camshaft seal
    • Fixing the crankshaft position
    • Installing and adjusting the VVT unit/timing gear pulley on the camshaft
    • Finishing
    • Check
• Valve Mechanism (B5234T3; 2003-2004)
  • Valve clearance
• Valve Mechanism (B5244S; 2001-2002)
  • Checking valve clearance
  • Valve clearance
    • Notes
    • Preparation
    • Removing the timing belt
    • Removing the timing gear pulley
    • Removing the camshaft cover
    • Cleaning
    • Preparations
    • Installing the camshaft and tappet
    • Installing the camshaft press
    • Checking the valve clearance
    • Correcting measured clearance
    • When the correct valve clearance is reached
    • Installing tappets and camshafts
    • Applying liquid gasket
    • Installing the camshaft covers
    • Installing the rear camshaft seal
    • Installing the front camshaft seal
    • Fixing the crankshaft position
    • Installing and adjusting the VVT unit/timing gear pulley on the camshaft
    • Finishing
    • Check
• Valve Mechanism (B5244S; 2003-2006)
  • Valve clearance
    • Notes
    • Preparation
    • Removing the timing belt
    • Removing the timing gear pulley
    • Removing the camshaft cover
    • Cleaning
    • Preparations
    • Installing the camshaft and tappet
    • Installing the camshaft press
    • Checking the valve clearance
    • Correcting measured clearance
    • When the correct valve clearance is reached
    • Installing tappets and camshafts
    • Applying liquid gasket
    • Installing the camshaft covers
    • Installing the rear camshaft seal
    • Installing the front camshaft seal
    • Fixing the crankshaft position
    • Installing and adjusting the VVT unit/timing gear pulley on the camshaft
    • Finishing
    • Check
• Valve Mechanism (B5244S6; 2003-2006)
  • Valve clearance
• Valve Mechanism (B5244T3; 2003)
  • Valve clearance
• Valve Mechanism (B5244T5; 2005-2009)
  • Valve clearance
• Valve Mechanism (B5254T2; 2003-2009)
  • Valve clearance
• Variable Valve Timing (B5204T5; B5254T4; 2004-2007)
  • Checking and adjusting the variable valve timing unit
    • Preparation
      • VVT unit checking and adjusting B5XX4TX (1999-)
      • VVT unit checking and adjusting B5244S6
      • VVT unit checking and adjusting B6XX4T (1999-2006)
    • Checking and adjusting the variable valve timing unit
      • Overview
      • Notes
      • Installing the variable valve timing unit on the camshaft
      • Tighten the timing belt
  • VVT solenoid, cleaning
    • VVT solenoid, cleaning
      • Check
        • Remove the VVT solenoid
        • Checking the VVT solenoid
      • Cleaning
      • Test driving and checking
    • Replacing the variable valve timing solenoid
      • Notes
      • Preparations
      • Removal
• Variable Valve Timing (B5234T3; 2001-2004)
  • Variable valve timing unit, checking and adjusting
  • VVT solenoid, cleaning
• Variable Valve Timing (B5244S; 2001-2006)
  • Checking and adjusting the variable valve timing unit
    • Preparation
      • Variable valve timing unit, checking and adjusting, B5XX4S-B5XX4S3 (1999-)
      • Variable valve timing unit, checking and adjusting, B6XX4S-B6XX4S3 (1999-2006)
    • Variable valve timing unit, checking and adjusting
    • Checking and adjusting the variable valve timing unit
      • Notes
      • Installing the variable valve timing unit on the camshaft
      • Tighten the timing belt
  • VVT solenoid, cleaning
• Variable Valve Timing (B5244S6; 2003-2006)
  • Variable valve timing unit, checking and adjusting
  • VVT solenoid, cleaning
• Variable Valve Timing (B5244T3; 2001-2003)
  • Variable valve timing unit, checking and adjusting
  • VVT solenoid, cleaning
• Variable Valve Timing (B5244T5; 2005-2009)
  • Variable valve timing unit, checking and adjusting
  • VVT solenoid, cleaning
• Variable Valve Timing (B5254T2; 2003-2009)
  • Variable valve timing unit, checking and adjusting
  • VVT solenoid, cleaning