Section 4 (44 Wheels, Tyres, Suspension Alignment 2.5L -- 982 - BOXSTER/CAYMAN)

• WM, 440519 Removing And Installing Wheel
  • Technical Values
  • Information
  • Removing Wheel
  • Installing Wheel
  • Subsequent Work
• WM, 440594 Balancing/Optimizing Wheels
  • Tools
  • Information
  • Explanation Of Terms
  • Balancing/Optimizing Wheels
    • Notes
    • Further To 1: Fitting The Tire On The Rim
    • Measuring Radial Force Variations
    • Further To 2B: Stationary Balancing With Rolling Smoothness Optimization
    • Further To 3: Fitting The Wheel On The Vehicle
    • Balancing Weights
    • Attaching Balance Stick-On Weights
• WM, 4405IN Wheels And Tires/Tyre Pressure
  • Information On Wheels And Tires/Tyre Pressure
    • Tire Pressure Of Cold Tires (20°C)
    • Overview Of Tires And Wheels (Standard]
• WM, 441202 Checking Disc Wheels
  • Tools
  • Checking Disc Wheels
• WM, 443219 Removing And Reinstalling Wheel Electronics
  • Technical Values
  • Information
    • General Information On Wheel Electronics
  • Preliminary Work
  • Removing And Reinstalling Wheel Electronics
    • Removing Wheel Electronics
    • Installing Wheel Electronics
  • Subsequent Work
• WM, 443419 Removing And Installing Control Unit For Tyre Pressure Monitoring (TPM)
  • Tools
  • Component Information
    • Installation Position Of RDK Control Unit
  • Preliminary Work
  • Removing And Installing Control Unit For Tyre Pressure Monitoring (TPM)
  • Subsequent Work
• WM, 443455 Replacing TPM Control Unit
  • Replacing TPM Control Unit
• WM, 444019 Mounting Tires (Removing And Installing Tires)
  • Tools
  • Tools And Materials
    • Tools
    • Requirements/Information On Removing/Mounting Tires
    • Special Notes For Tire Pressure Monitoring (TPM)
  • Removing/Mounting Tires (Removing And Installing Tires)
    • Removing Tires
    • Mounting Tires
• WM, 4440IN Information On Tires/Mounting Tires
  • Information
    • Tires
• WM, 449503 Suspension Alignment, Complete
  • Tools
  • Technical Values
  • Information
    • General Procedure For Suspension Alignment
  • Height Check
    • Measuring Height Of Front And Rear Axle Information
  • Rear-Axle And Front-Axle Vehicle Alignment
    • Preliminary Work
    • Adjusting Rear-Axle Camber
    • Adjusting Rear-Axle Toe
    • Adjusting Front-Axle Camber
    • Adjusting Front-Axle Toe
  • Subsequent Work
• WM, 4495TW Setting Values For Suspension Alignment
  • Vehicle Height
  • Wheel Alignment Values
• WM, 4495TW Conversion Table For Wheel Alignment Values
  • Minutes To Decimal Degrees
    • Notes
    • Conversion From Minutes To Decimal Degrees (Examples)
    • Conversion From Decimal Degrees To Minutes (Examples)