REP-TAT-P-5218-02 Installing the head restraint guide
NOTE:
TECHNICAL INFORMATION
The head restraint guides are not identical in construction.
The head restraint guides are not identical in construction.
- Ensure that the headrest guide (2) is installed on the left side with the lock for head restraint when facing the direction of travel.
- Insert the head restraint guides (2) correctly from the top in the backrest frame (3).
The detents (1) must engage audibly.
Follow-up work
- Install SUPPORT
- Install the HEAD RESTRAINT
- Install BACKREST SEAT COVER WITH CUSHION
- Install/replace SIDE AIRBAG
- Install the TRIM at the bottom of the aperture
- Install the REAR PANEL on the front seat backrest
- Install the OUTER COVER on the front seat
- Install the LEVER for seat height adjustment
- Install the STEERING LEVER for backrest adjustment
- Install the COVER for backrest adjustment
- Install INNER COVER
- Install FRONT SEAT
- Install the front STRAP FITTING