REP-TAT-P-5218-02 Installing the outer cover on the front seat

• Attach the retaining strap (1) in the outer cover (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in outer cover (3) into the guides (4) from front.
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Outer trim to front seat
  Screw
  tightening torque	1.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screw (2) from the bottom.

Follow-up work 

• Install the STEERING LEVER  for backrest adjustment
• Install the LEVER  for seat height adjustment
• Install the COVER  for backrest adjustment
• Install the front STRAP FITTING