REP-TAT-P-5218-02 Install support
- Position the support (3) correctly on the backrest frame (4).
- Engage the detents (2).
- Replace the blind rivets (1).
Parts: Blind rivet
- Secure the support (3) with the blind rivets (1) on the backrest frame (4).
Follow-up work
- Install the HEAD RESTRAINT
- Install BACKREST SEAT COVER WITH CUSHION
- Install/replace SIDE AIRBAG
- Install the TRIM at the bottom of the aperture
- Install the REAR PANEL on the front seat backrest
- Install the OUTER COVER on the front seat
- Install the LEVER for seat height adjustment
- Install the STEERING LEVER for backrest adjustment
- Install the COVER for backrest adjustment
- Install INNER COVER
- Install FRONT SEAT
- Install the front STRAP FITTING