Section 31 (Engine Electrical System - Repair (R61) -- Cooper Paceman)
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
- Safety And General Information
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- 12 00... Instructions for working on the ignition system
- 12 00... Notes/information on start assistance (jump starting)
- 61 20... Battery replacement information
- 61 13... Butt connector for repairing a plug connection
- 11 00... Handling components after flood damage
- 12 00... Instructions for removal and replacement of control units
- 61 00... Notes for disconnecting and connecting battery
- 61 00... Notes on handling wiring harnesses and cables
- Spark Plugs
- Ignition Coil
- Engine Control Unit And Sensors
- 12 14 700 Encoding the control unit (DME)
- 12 14 524 Replace pulse sensor on exhaust camshaft (N16)
- 12 14 550 Replace the control unit (DME) (N16, N18)
- 12 14 600 Replace the knock sensor (N16, N18)
- 12 14 521 Replacing crankshaft pulse sensor (N16, N18)
- 12 14 521 Replacing crankshaft pulse sensor (N18)
- 12 14 523 Replacing pulse sensor on intake camshaft (N16)
- Alternator
- Voltage Regulator For Alternator
- Starter Motor
- Engine Wiring Harness
- Oil Pressure Sensor
- Coolant Temperature Sensor