Information Center - Instrumentation, Message Center, & Warning Chimes
- Description And Operation
- Diagnosis And Testing
- Instrumentation, Message Center and Warning Chimes
- Special Tool(s)
- Principles of Operation
- Instrument Cluster (IC)
- IC Gateway Function
- IC Configuration
- IC Prove-Out
- Integrated Circuit Display
- Information And Message Center
- Trailer Sway Message
- Warning Chimes
- Warning Chime Characteristics
- Safety Belt Warning Chime
- Belt-Minder®
- Air Bag Secondary Warning Chime
- Key-In-Ignition Warning Chime
- Headlamps On Warning Chime
- Door Ajar Warning Chime
- Turn Signal On Warning Chime
- Parking Brake Warning Chime
- Turn/Hazard On Tone
- Inspection and Verification
- DTC Charts
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: Incorrect Fuel Gauge Indication
- Pinpoint Test B: The Temperature Gauge Is Inoperative (Except Hybrid)
- Pinpoint Test C: Incorrect Temperature Gauge Indication (Except Hybrid)
- Pinpoint Test D: The Speedometer Is Inoperative
- Pinpoint Test E: Incorrect Speedometer Indication
- Pinpoint Test F: The Odometer Is Inoperative
- Pinpoint Test G: The Tachometer Is Inoperative
- Pinpoint Test H: Incorrect Tachometer Indication
- Pinpoint Test I: The Electric Power Charge/Assist Gauge Is Inoperative (Hybrid Only)
- Pinpoint Test J: The Brake Warning Indicator Is Never On
- Pinpoint Test K: The Brake Warning Indicator Is Always On
- Pinpoint Test L: The ABS Warning Indicator Is Never/Always On
- Pinpoint Test M: The Door Ajar Warning Indicator Is Never/Always On
- Pinpoint Test N: The Safety Belt Warning Indicator Is Never/Always On
- Pinpoint Test O: The Check Fuel Cap Indicator Is Never/Always On (Base Cluster Only) Or The CHECK FUEL FILL INLET Message Is Inoperative/Always On
- Pinpoint Test P: The Low Fuel Warning Indicator Is Never/Always On
- Pinpoint Test Q: The Low Oil Pressure Warning Indicator Is Never/Always On (Except Hybrid)
- Pinpoint Test R: The Low Oil Pressure Warning Indicator Is Never/Always On (Hybrid Only)
- Pinpoint Test S: The Malfunction Indicator Lamp (MIL) Is Never/Always On
- Pinpoint Test T: The Grade Assist Indicator Is Never/Always On (Except Hybrid)
- Pinpoint Test U: The Charging System Warning Indicator Is Never/Always On
- Pinpoint Test V: The Air Bag Warning Indicator Is Never/Always On
- Pinpoint Test W: The High Beam Indicator Is Never/Always On
- Pinpoint Test X: The LH/RH Turn Indicator Is Never/Always On
- Pinpoint Test Y: The Speed Control Indicator Is Never/Always On
- Pinpoint Test Z: The Stability/Traction Control Indicator Is Never/Always On
- Pinpoint Test AA: The Powertrain Malfunction (Wrench) Warning Indicator Is Never/Always On
- Pinpoint Test AB: The Tire Pressure Monitoring System (TPMS) Warning Indicator Is Never/Always On
- Pinpoint Test AC: The Hazard Warning Indicator Is Inoperative (Hybrid Only)
- Pinpoint Test AD: The Over-Temperature Warning Indicator Is Never/Always On (Hybrid Only)
- Pinpoint Test AE: The Ready Indicator Is Never/Always On (Hybrid Only)
- Pinpoint Test AF: The Instrument Cluster (IC) Is Inoperative
- Pinpoint Test AG: The Message Center Is Not Operating Correctly
- Pinpoint Test AH: The STOP SAFELY NOW Warning Is Inoperative/Always On (Hybrid Only)
- Pinpoint Test AI: The REGEN BRAKING DISABLED Message Is Inoperative/Always On (Hybrid Only)
- Pinpoint Test AJ: The Chime Sounds When The Driver Door Is Ajar (No Key In Ignition And Headlamps Off)
- Pinpoint Test AK: The Key-In-Ignition Warning Chime Is Inoperative
- Pinpoint Test AL: The Headlamps On Warning Chime Is Inoperative
- Pinpoint Test AM: The Turn Signal On Warning Chime Is Inoperative
- Pinpoint Test AN: The Safety Belt Warning Chime Does Not Operate Correctly/The Belt-Minder® Feature Does Not Operate Correctly
- Pinpoint Test AO: The Parking Brake Warning Chime Is Inoperative
- Pinpoint Test AP: DTC B1317
- Pinpoint Test AQ: DTC B1318
- Pinpoint Test AR: DTC B2A20 Or U2472
- Pinpoint Test AS: DTC U0100
- Pinpoint Test AT: DTC U0101
- Pinpoint Test AU: DTC U0111
- Pinpoint Test AV: DTC U0114
- Pinpoint Test AW: DTC U0121
- Pinpoint Test AX: DTC U0129
- Pinpoint Test AY: DTC U0131
- Pinpoint Test AZ: DTC U0140
- Pinpoint Test BA: DTC U0151
- Pinpoint Test BB: DTC U0163
- Pinpoint Test BC: DTC U0164
- Instrumentation, Message Center and Warning Chimes
- General Procedures
- Removal And Installation