LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, & Warning Chimes >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Instrument Cluster (IC) >> IC Configuration

IC Configuration

The IC contains items that are configurable. While some configurable items are customer preference items, most items are configured at the end of the line production and only available for configuration using As-Built data. Refer to MODULE CONFIGURATION for additional information on As-Built data and module configuration.

NOTE: When installing a new IC, it is necessary to upload the module configuration to the scan tool. Following installation of the IC, download the module configuration from the scan tool into the new IC. Refer to MODULE CONFIGURATION . It is also necessary to carry out a parameter reset procedure whenever a new IC or PCM is installed. Refer to ANTI-THEFT - PATS - HYBRID .

The configurable customer preference items are as follows:

scientia non olet · About LEMON Manuals