LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, & Warning Chimes >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test AM: The Turn Signal On Warning Chime Is Inoperative >> Pinpoint Test Am: The Turn Signal On Warning Chime Is Inoperative

Pinpoint Test Am: The Turn Signal On Warning Chime Is Inoperative

  1. AM1 CHECK THE KEY-IN-IGNITION WARNING CHIME OPERATION 
    • Ignition OFF.
    • With the ignition switch in the OFF position and the key in the ignition lock cylinder, open the LH front door and observe the key-in-ignition warning chime operation.
    • Does the key-in-ignition warning chime operate correctly? 
    • Yes:  GO to AM2  .
    • No:  INSTALL a new Instrument Cluster (IC). REFER to INSTRUMENT CLUSTER (IC) . TEST the system for normal operation.
  2. AM2 CHECK THE TURN SIGNAL INDICATORS OPERATION 
    • Ignition ON.
    • Verify the turn signal indicators operation.
    • Do the turn signal indicators operate correctly? 
  3. AM3 CHECK THE ODOMETER FOR CORRECT OPERATION 
    • Drive the vehicle and observe the odometer for correct operation.
    • Does the odometer operate correctly? 
scientia non olet · About LEMON Manuals