Pinpoint Test Al: The Headlamps On Warning Chime Is Inoperative
- AL1 CHECK THE SAFETY BELT WARNING CHIME OPERATION
- Ignition OFF.
- Ignition ON.
- Monitor the safety belt warning chime when the ignition switch is transition from OFF to RUN for 6 seconds.
- Does the safety belt warning chime operate for approximately 6 seconds?
- AL2 CHECK THE EXTERIOR LAMPS OPERATION
- Ignition OFF.
- Place the headlamp switch in the PARK or HEADLAMP ON position.
- Do the headlamps or parking lamps operate?
- AL3 CHECK THE DOOR AJAR WARNING INDICATOR OPERATION
- Ignition ON.
- Open then close the LH front door while observing the door ajar warning indicator.
- Does the door ajar warning indicator operate correctly?