LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, & Warning Chimes >> Removal And Installation >> Instrument Cluster (IC) >> Removal

Instrument Cluster (IC): Removal

  1. If installing a new Instrument Cluster (IC), upload the module configuration information to the scan tool. For additional information, refer to MODULE CONFIGURATION .
  2. Lower the tilt steering column to the lowest position.
  3. Pull the IC finish panel straight out to release the retainer clips and remove the finish panel.
    • Disconnect the instrument panel dimmer switch electrical connector and the ambient air temperature sensor (if equipped).
  4. Remove the 4 IC screws and the IC.
    • Disconnect the electrical connector.
scientia non olet · About LEMON Manuals