Remove/Install Dashboard - Ar68.10-D-1000TS
Model 907
Shown on model 907 with code SA6 (front passenger airbag)
Shown on model 907 with code HY1 (radio remote control for hot-water auxiliary heater)
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts. |
AS91.00-Z-0008-01A | |
| Notes on carrying out repair work in the vehicle interior | AH68.00-N-0001-01S | ||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Remove/install | |||
| 1 | Remove front side air vents. | AR83.10-D-4741TS | |
| 2 | Remove defroster vents for the side windows. | AR83.10-D-4719TS | |
| 3 | Remove steering column module. | AR54.25-D-2802TS | |
| 4 | Remove steering column cover from the instrument panel. | AR68.10-D-1060TS | |
| 5 | Remove instrument cluster. | AR54.30-D-6016TS | |
| 6 | Remove bottom trim for the instrument panel on the driver's side. | AR68.10-D-1501TS | |
| 7.1 | Remove head unit. | Model 907 with code E1A (MBCONNECT-5) Model 907 with code E1C (Audio 25) Model 907 with code EJ2 (Audio 20) Model 907 with code EJ9 (COMAND Online) |
|
| AR82.85-D-1101TS | |||
| 7.2 | Remove radio. | Model 907 with code E1O (Entry-level radio) |
|
| AR82.60-D-7502TS | |||
| 7.3 | Remove top center trim from the instrument panel. | Model 907 with code ER0 (Basic fittings f. radio) Model 907 with code FJ6 (Center area with 2-DIN stowage compartments and air vent) |
|
| AR68.10-D-1497TS | |||
| 7.4 | Remove top center stowage compartment from the instrument panel. | Model 907 with code FJ7 (Center area with stowage compartment) |
|
| AR68.10-D-1514TS | |||
| 8.1 | Remove stowage tray from the instrument panel. | Model 907 except code FJ1 (Hinged lid for stowage compartment) except code FJ5 (Folding cover for left and right stowage compartments) |
|
| AR68.10-D-0003TS | |||
| 8.2 | Remove lockable center stowage compartment from the instrument panel. | Model 907 with code FJ1 (Hinged lid for stowage compartment) |
|
| AR68.10-D-1518TS | |||
| 9 | Remove covers for the side speakers from the instrument panel. | AR68.10-D-0002TS | |
| 10 | Remove A-pillar trims. | AR68.30-D-4051TS | |
| 11 | Remove center trim from instrument panel. | AR68.10-D-0001TS | |
| 12 | Remove start/stop button. | AR54.25-D-4001TS | |
| 13 | Remove vehicle interior temperature sensor. | Model 907 with code HH4 (THERMOTRONIC automatic climate control) Model 907 with code HH9 (Air conditioner, automatic heater control) |
|
| AR83.30-D-8105TS | |||
| 14.1 | Remove bottom trim for instrument panel on the front passenger side. | Model 907 except code FJ4 (Stowage compartment under cockpit) |
|
| AR68.10-D-1502TSF | |||
| 14.2 | Remove stowage compartment in the lower part of the instrument panel on the front passenger side. | Model 907 with code FJ4 (Stowage compartment under cockpit) |
AR68.10-D-1610TS |
| 15 | Remove central locking system antenna amplifier. | AR80.20-D-0002TS | |
| 16 | Remove speaker from the center instrument panel. | Model 907 with code E1C (Audio 25) Model 907 with code EJ2 (Audio 20) Model 907 with code EJ9 (COMAND Online) Model 907 with code EY5 (Mercedes-Benz emergency call system) |
|
| AR82.62-D-1101TS | |||
| 17 | Remove side speakers from instrument panel. | Model 907 with code EL9 (Two-way loudspeaker system in front and rear) |
|
| AR82.62-D-1102TS | |||
| 18 | Remove screw/bolts (3). | ||
| 19 | Remove bottom front passenger side trim (2). | ||
| 20 | Disconnect electrical connectors (5). | Model 907 with code SA6 (Airbag, co-driver) |
|
| 21 | Unscrew screw (4). | Model 907 with code SA6 (Airbag, co-driver) |
|
| 22 | Disconnect electrical connectors (6). | If installed. |
|
| 23 | Unscrew bolt (7). | ||
| 24 | Remove air duct (8). | ||
| 25 | Remove screw (14). | ||
| 26 | Remove air duct (15). | ||
| 27 | Separate electrical connector (11). | If installed. | |
| 28 | Remove screws/bolts (9). | ||
| 29 | Unscrew bolts (10). | ||
| 30 | Slightly lift instrument panel (1) and release from crossmember. | ||
| 31 | Completely open the front door on the front passenger side. | ||
| 32 | Attach suitable protective covers in the entrance and door area on the front passenger side. | ||
| 33 | Lift instrument panel (1) starting from the front passenger side and unclip the antenna for the stationary heater Telestart receiver (12) on the line brackets (13) from the instrument panel (1). | Model 907 with code HY1 (Radio remote control for aux. water heater) Do not lift instrument panel (1) too far. Otherwise, damage to the antenna for the stationary heater Telestart receiver (12) may occur. |
|
| Fig 1 | |||
| 34 | Remove instrument panel (1) and set down outside of the vehicle. | ||
| 35 | Install in the reverse order. | ||
| Check | |||
| 36 | Perform function test of all components installed in the instrument panel (1). |