Retrofit COMAND Online - AN82.85-P-0009LWO

Model 238 

with code 218 (Rear view camera) 

with code 235 (Active Parking Assist) 

with code 246 (Analogue clock) 

with code 270 (Aerial for GPS) 

with code 3U1 (Headunit europe/CIS-states/Monoglei) 

except code 506 (Audio 20 NTG 5.5 radio) 

Model 238 

with code 246 (Analogue clock) 

with code 270 (Aerial for GPS) 

with code 3U1 (Headunit europe/CIS-states/Monoglei) 

except code 218 (Rear view camera) 

except code 506 (Audio 20 NTG 5.5 radio) 

Shown on model 238.3 

Courtesy of MERCEDES-BENZ USA

Shown on model 238.3 

Courtesy of MERCEDES-BENZ USA

Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
Topical note	Notes on avoiding damage to optical fibers during repair work		AH82.60-P-0001-05AK
	Remove
1	Remove instrument cluster.
		The frame and the audio/COMAND display (A40/8) are no long required.	AR54.30-P-6015LWE
2	Remove center console.
		Model 238 with transmission 725	AR68.20-P-2000LWE
		Model 238 with transmission 716	AR68.20-P-2000LWO
3	Remove glove compartment.
			AR68.10-P-1402LWE
4	Remove head unit (A26/17) for Audio 20 or Audio 20 USB radio.
		The head unit (A26/17) is no longer required.	AR82.85-P-1101LWE
5	Remove HERMES control unit.
			AR82.95-P-0019LWE
6	Remove front passenger seat.
			AR91.10-P-1000LW
7	Remove FM 2, DAB and TV antenna amplifier.	Model 238 with code 537 (Digital radio (DAB))
		Model 238.3	AR82.62-P-8311LWE
		Model 238.4 The FM 2, DAB and TV antenna amplifier is no longer required.	AR82.62-P-8311LWP
8	Remove FM, AM, CL, DAB and KEYLESS-GO antenna amplifier.	Model 238 with code 537 (Digital radio (DAB))
		Model 238.3	AR82.62-P-8307LWO
		Model 238.4 The FM, AM, CL, DAB and KEYLESS-GO antenna amplifier is no longer required.	AR82.62-P-8307LWR
9	Remove floor covering at front on front passenger side.
			AR68.20-P-2065LWE
10	Remove Bluetooth® antenna.
		The Bluetooth® antenna is no longer required. Model 238 with code 294 (Knee airbag) Do not remove driver knee airbag, routing of electric line for Bluetooth® antenna is done via cutout in display module.	AR82.62-P-8980LWE
11	Remove ventilation duct (4).
12	Remove footrest (3).
13	Open cable duct (5).	Model 238 up to 30.11.17
14	Release A-pillar fuse box on front passenger side (F1/3).
			AR54.15-P-0004LWE
15	Remove Audio/COMAND control panel (A40/9).
		Model 238 except code 448 (Touchpad) The Audio/COMAND control panel (A40/9) is no longer required.	AR54.21-P-0501LWE
16	Remove multimedia connection unit.
		The multimedia connection unit is no longer required.	AR82.60-P-1032LW
17	Disconnect electrical connector on tuner unit.	Model 238 with code 522 (Audio 20 radio) with code 537 (Digital radio (DAB))
		Model 238.3	AR82.60-P-2002LWO
		Model 238.4	AR82.60-P-2002LWP
18	Remove coupling for fiber-optic cable from detached electrical connector socket of tuner unit.	Model 238 with code 522 (Audio 20 radio) with code 537 (Digital radio (DAB)) with code 810 (Sound system)
19	Wrap felt tape around detached electrical connectors of tuner unit.	Model 238 with code 522 (Audio 20 radio) with code 537 (Digital radio (DAB))
20	Strap down electrical connectors of tuner unit at suitable point.	Model 238 with code 522 (Audio 20 radio) with code 537 (Digital radio (DAB)) Ensure they are properly strapped down and that no chafing can occur. Otherwise, the wiring harness may be damaged and/or clattering noises may be produced.
	Install
21	Retrofit fiber-optic cable adapter.	Model 238 with code 522 (Audio 20 radio) with code 537 (Digital radio (DAB)) with code 810 (Sound system) Ensure wiring harness is routed correctly and free of chafing points. Otherwise, the wiring harness may be damaged, system failures may occur and/or clattering noise may be produced.	AN82.85-P-0009-08LWO
22	Modify audio/COMAND display (A40/8).		AN82.85-P-0009-04LWO
23	Retrofit touchpad.	Model 238 except code 448 (Touchpad)	AN82.60-P-0017-03LWE
24	Install new Audio/COMAND control panel (A40/9) into center console cover.
		Model 238 except code 446 (Touchpad only) except code 448 (Touchpad)	AR54.21-P-0501LWE
25	Retrofit wiring harness for touchpad.	Model 238 except code 448 (Touchpad)	AN82.60-P-0017-01LWO
26	Refit electric line for GPS antenna.		AN82.85-P-0007-07LWE
27	Refit plug housing for reversing camera electrical wiring harness.	Model 238 with code 218 (reversing camera) with code 235 (Active Parking Assist with PARKTRONIC) with code 246 (Analog clock)	AN82.85-P-0009-07LWE
28	Refit electric line for audio/COMAND display (A40/8).		AN82.85-P-0009-05LWO
29	Retrofit electrical wiring harness for instrument cluster.	Fix electrical wiring harness for instrument cluster in place only after routing all retrofit wiring harnesses.	AN82.85-P-0009-06LWO
30	Route Bluetooth® antenna over device installation frame of audio/COMAND display (A40/8) and install.
		Fix electrical wiring harness for Bluetooth® antenna in place only after routing all retrofit wiring harnesses.	AR82.62-P-8980LWE
31	Retrofit Wi-Fi antenna.		AN82.85-P-0005-05LWE
	Risk of injury  caused by burns to skin and eyes, risk of poisoning caused by inhaling fumes during soldering.	Wear protective gloves, protective clothing and safety glasses. Ensure that the work area is adequately ventilated. Secure power supply cables. Avoid sources of fire in working area. Model 238 as of 01.12.17	AS00.19-Z-0002-01A
32	Retrofit wiring harness for touchpad in center console area.	Model 238 except code 448 (Touchpad)
Topical note	Notes on the use of paint scraping nuts on ground connections		AH00.19-P-1000-20A
	Notes on soft soldering	Model 238 as of 01.12.17	AH00.19-P-1000-07A
	Repairing wiring harness using solder connectors	Model 238 as of 01.12.17	AR00.19-P-0100-09A
		Model 238 up to 30.11.17	AN82.60-P-0017-04LWO
		Model 238 as of 01.12.17 Fix touchpad wiring harness in place only after routing all retrofit wiring harnesses.	AN82.60-P-0017-04LWP
		Left center console ground point	*BA00.19-P-1011-02B
		Ground point for electromagnetic compatibility (touchpad)	*BA00.19-P-1030-02B
		Model 238 as of 01.12.17 Adapter	Fig 3
		Model 238 as of 01.12.17 Reflector	Fig 4
		Model 238 as of 01.12.17 Welding bead catcher	Fig 1
		Model 238 as of 01.12.17 Wiring harness repair kit, basic	Fig 5
		Model 238 as of 01.12.17 New passenger car wiring harness repair kit	Fig 2
33	Retrofit electrical wiring harness for SD card navigation.	Fix electrical wiring harness for SD card navigation in place only after routing all retrofit wiring harnesses.	AN82.85-P-0007-06LWO
34	Install footrest (3).
35	Install ventilation duct (4).
36	Close cable duct (5).	Model 238 up to 30.11.17
37	Insert a fuse with fuse rating of 5 A into slot "MF3" of front passenger side fuse box on A-pillar (F1/3).
	Assignment of passenger-side A-pillar fuse box	Model 238 up to model year 2021 except code 448 (Touchpad)	GF54.15-P-1256-48FH
	Wiring diagram of passenger-side A-pillar fuse box	Model 238 as of model year 2021 except code 448 (Touchpad)	PE54.15-P-2519DEA
38	Insert a fuse with a fuse rating of 7.5 A into slot 313 of fuse box on A-pillar on front passenger side (F1/3).
	Assignment of passenger-side A-pillar fuse box	Model 238 up to model year 2021	GF54.15-P-1256-48FH
	Wiring diagram of passenger-side A-pillar fuse box	Model 238 as of model year 2021	PE54.15-P-2519DEA
39	Install floor covering at front on front passenger side.
			AR68.20-P-2065LWE
40	Install new FM 2, DAB and TV antenna amplifier.	Model 238 with code 537 (Digital radio (DAB))
		Model 238.3	AR82.62-P-8311LWE
		Model 238.4	AR82.62-P-8311LWP
41	Install new FM, AM, CL, DAB and KEYLESS-GO antenna amplifier.	Model 238 with code 537 (Digital radio (DAB))
		Model 238.3	AR82.62-P-8307LWO
		Model 238.4	AR82.62-P-8307LWR
42	Install front passenger seat.
			AR91.10-P-1000LW
43	Install HERMES control unit.
		The GPS line is connected at a later stage to the head unit (A26/17).	AR82.95-P-0019LWE
44	Install new head unit (A26/17).
			AR82.85-P-1101LWE
45	Install remaining parts.
	Update Vehicle Documentation (VeDoc)
46.1	Delete special equipment from on-line vehicle data card.	Model 238 with code 520 (Audio 20 USB) CODE 520 (Audio 20 USB)
46.2	Delete special equipment from on-line vehicle data card.	Model 238 with code 522 (Audio 20 radio) Code 522 (Audio 20 radio)
47	Delete special equipment from on-line vehicle data card.	Model 238 with code 355 (Pre-installation for navigation retrofit) Code 355 (Preinstallation for navigation retrofit)  Model 238 with code 357 (Map navigation) Code 357 (Card navigation)
48	Enter special equipment into online vehicle data card.	Code 531 (COMAND APS)  Code 464 (Digital instrument cluster full display)  Code 14U (Smartphone integration package)  Code 16U (Smartphone integration Carplay)  Code 17U (Smartphone integration Google  Automotive Link)  Model 238 except code 448 (Touchpad) Code 448 (Touch pad)
49	Attach "COMAND APS retrofitted in accordance with AN82.85-P-0009LWO" note under field organization texts to design group 54 and design group 82.
50	Connect diagnostic system and select vehicle using vehicle identification number (VIN).
			AD00.00-P-2000-06LWO
51	Perform variant coding using the software calibration number (SCN).	Instrument cluster  Head unit  HERMES control unit  Electronic ignition switch control unit  Climate control, control unit  Model 238 with code 641 (Dynamic left-hand traffic LED headlamps), model 238 with code 642 (Dynamic right-hand traffic LED headlamps) Headlamp control unit  Model 238 with code 235 (Active Parking Assist with PARKTRONIC) Parking system control unit  Model 238 with code 233 (DISTRONIC PLUS) Mercedes-Benz Intelligent Drive control unit
52	Disconnect diagnostic system.
			AD00.00-P-2000-06LWO
	Check
53	Perform function test.	See Owner's Manual.

Number	Designation			Model 238
BA00.19-P-1011-02B	Left center console ground point	W12	Nm	10

Number	Designation			Model 238
BA00.19-P-1030-02B	Ground point for electromagnetic compatibility (touchpad)	W91	Nm	10

Part no.	Designation	Quantity
KG 99 (see EPC)	COMAND Online package contents	1