Remove/Install Transmission With Torque Converter - AR27.10-P-0500OLD
Transmission 725.0 in model 213, 238 with engine 264
with code M005 (Vehicles with 4MATIC/all-wheel drive)
Transmission 725.0 in model 213, 238 with engine 274
with code M005 (Vehicles with 4MATIC/all-wheel drive)
Transmission 725.0 in model 213, 238 with engine 642
with code M005 (Vehicles with 4MATIC/all-wheel drive)
Transmission 725.0 in model 213, 238 with engine 654
with code M005 (Vehicles with 4MATIC/all-wheel drive)
Shown on transmission 725.0 in model 213 with engine 274 with code M005 (4MATIC)
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. Do not pour transmission oil into beverage bottles. |
AS00.40-Z-0001-01A | |
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on threaded connections fastened using a tightening angle-based tightening process | AH00.00-P-0020-01A | ||
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| Notes on automatic transmission | AH27.19-P-0001-01NKB | ||
| Remove | |||
| 1 | Shift the transmission (1) into neutral position. | ||
| 2 | Release parking brake. | ||
| 3 | Disconnect ground line from battery. | Transmission 725.0 in model 213 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR54.10-P-0003LW |
| Transmission 725.0 in model 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR54.10-P-0003LWO | ||
| 4.1 | Remove charge air cooler with coolant lines still connected and place to one side. | Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR09.41-P-6817OGW |
| Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) | AR09.41-P-6817MRH | ||
| 4.2 | Remove impact plate in front of poly-V-belt. | Transmission 725.0 in model 213, 238 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) | AR13.22-P-1202OLC |
| 5 | Secure vehicle on vehicle lift. | AR00.60-P-1006A | |
| 6 | Remove center and rear lower engine compartment lining. | Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR61.20-P-1105LWE |
| 7 | Remove front axle differential propeller shaft (3). | Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR41.10-P-0070OLC |
| 8 | Disconnect ground line (2) from transmission (1). | ||
| 9 | Release and disconnect electrical connection on electric controller unit. | ||
| 10 | Remove electrical wiring harness from transmission (1). | ||
| 11 | Remove oil lines. | AR27.55-P-0600OLE | |
| 12 | Remove oil cooler from transmission (1). | Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR27.55-P-1000OLC |
| 13 | Remove cover (4). | ||
| 14 | Remove torque converter (10) from drive plate (13). | Do not use an impact wrench or compressed air tool for removal. Otherwise, the threaded unions (14) in the drive plate (13) may be damaged. |
AR27.20-P-0001-01EWM |
| Fig 2 | |||
| Fig 1 | |||
| 15 | Unfasten starter wiring harness from transmission (1). | ||
| 16.1 | Detach starter from transmission (1) and place to one side and fasten with lines connected. | Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) except code B01 (48V technology) Transmission 725.0 in model 213, 238 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 654.9 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 274.9 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR15.30-P-7100MRD |
| Transmission 725.0 in model 213, 238 with engine 654.9 with code M005 (Vehicles with 4MATIC/all-wheel drive) | AR15.30-P-7100OLC | ||
| Transmission 725.0 in model 213, 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) | AR15.30-P-7100OGY | ||
| Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) except code B01 (48V technology) Secure starter against falling down. Damage will otherwise occur. |
AR15.30-P-7100MRH | ||
| 16.2 | Remove the starter opening cover on the crankcase. | Transmission 725.0 in model 213, 238 with engine 264 with code B01 (48V technology) with code M005 (Vehicles with 4MATIC/all-wheel drive) |
|
| 17 | Detach starter wiring harness bracket from transmission (1). | ||
| 18 | Remove screws (19). | ||
| 19 | Remove transmission (1) with torque converter (10). | Secure the torque converter (10) to prevent it from dropping down. Damage will otherwise occur. |
|
| 20 | Remove torque converter (10). | If necessary. | AR27.20-P-0050EWM |
| 21 | Remove corrosion from crankshaft. | AR03.20-P-1000-01A | |
| Multi-purpose paste | *BR00.45-Z-1009-06A | ||
| Assembly cleaner | *BR00.45-Z-1028-04A | ||
| 22 | Check threaded unions (14) in drive plate (13). | If problems exist, ↓ Install a new clutch plate (13). Transmission 725.0 in model 213, 238 with engine 274.9 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR03.30-P-8001MRD |
| Transmission 725.0 in model 213, 238 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) | AR03.30-P-8001OLC | ||
| Transmission 725.0 in model 213, 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) | AR03.30-P-8001OGW | ||
| Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) | AR03.30-P-8003MRH | ||
| Install | |||
| 23 | Insert torque converter (10). | After removing the torque converter (10). | AR27.20-P-0050EWM |
| 24 |
Install transmission (1) with torque converter (10). 000 588 10 62 00 Support plate |
WS26.00-P-3309B | |
| 000 588 11 62 00 Major assembly mount | WS01.00-P-0092B | ||
| 25 | Screw in screws (19). | *BA27.10-P-1001-04H | |
| 26 | Attach starter wiring harness bracket to transmission (1). | *BA00.10-P-1002-01A | |
| 27.1 | Release mounting of starter and mount starter onto transmission (1). | Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) except code B01 (48V technology) Transmission 725.0 in model 213, 238 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 654.9 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 274.9 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR15.30-P-7100MRD |
| Transmission 725.0 in model 213, 238 with engine 654.9 with code M005 (Vehicles with 4MATIC/all-wheel drive) | AR15.30-P-7100OLC | ||
| Transmission 725.0 in model 213, 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) | AR15.30-P-7100OGY | ||
| Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) except code B01 (48V technology) |
AR15.30-P-7100MRH | ||
| 27.2 | Install starter opening cover on crankcase. | Transmission 725.0 in model 213, 238 with engine 264 with code B01 (48V technology) with code M005 (Vehicles with 4MATIC/all-wheel drive) |
*BA15.30-P-1001-01U |
| 28 | Fasten starter wiring harness onto transmission (1). | ||
| 29 | Mount torque converter (10) onto drive plate (13). | Never use an impact wrenches or compressec air tools when screwing-in the bolts. Otherwise, the threaded unions (14) in the drive plate (13) may be damaged. |
AR27.20-P-0001-01EWM |
| *BA27.20-P-1001-01D | |||
| Fig 2 | |||
| 30 | Install cover (4). | ||
| 31 | Attach oil cooler to transmission (1). | Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR27.55-P-1000OLC |
| 32 | Install oil lines. | AR27.55-P-0600OLE | |
| 33 | Mount electrical wiring harness onto transmission (1). | ||
| 34 | Assemble and lock electrical connector at electric controller unit. | ||
| 35 | Attach ground line (2) to transmission (1). | *BA27.10-P-1024-04H | |
| 36 | Install front axle differential propeller shaft (3). | Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR41.10-P-0070OLC |
| 37.1 | Attach charge air cooler with connected coolant lines. | Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR09.41-P-6817OGW |
| Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) | AR09.41-P-6817MRH | ||
| 37.2 | Install impact plate in front of poly-V-belt. | Transmission 725.0 in model 213, 238 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) | AR13.22-P-1202OLC |
| 38 | Attach ground line to battery. | Transmission 725.0 in model 213 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR54.10-P-0003LW |
| Transmission 725.0 in model 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR54.10-P-0003LWO | ||
| 39 | Check and correct transmission oil level. | Transmission 725.047 in model 213 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.047 in model 213 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR27.00-P-0270EWH |
| Transmission 725.0 (except 725.007/017/047) in model 213 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 (except 725.017/047) in model 213 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR27.00-P-0270EWN | ||
| 40 |
Read out and delete fault memory. | Transmission 725.0 in model 213 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AD00.00-P-2000-04B |
| Transmission 725.0 in model 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AD00.00-P-2000-06LWO | ||
| 41 |
Perform transmission adaptation with vehicle diagnosis system. | After replacement or repair of transmission (1). Transmission 725.0 in model 213 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AD00.00-P-2000-04B |
| Transmission 725.0 in model 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AD00.00-P-2000-06LWO | ||
| 42 |
Reset data on service life of torque converter lockup clutch with the vehicle diagnosis system. | After replacement or repair of torque converter (10). Transmission 725.0 in model 213 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AD00.00-P-2000-04B |
| Transmission 725.0 in model 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AD00.00-P-2000-06LWO | ||
43 |
Risk of accident
from vehicle starting off by itself when engine running. Risk of injury
(bruises and burns) resulting from working on the engine while it is being started or when it is running. Perform engine test run and check transmission (1) for leak tightness and proper operation. |
Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A |
| 44 | Install center and rear sections of lower engine compartment lining. | Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR61.20-P-1105LWE |
| 45 | Disconnect vehicle from vehicle lift. | AR00.60-P-1006A |
HEADLESS SCREWS: BOLTS AND NUTS, COARSE-PITCH THREAD
| Number | Designation | Model all (4xWD, CAR, smart) | |||
|---|---|---|---|---|---|
| BA00.10-P-1002-01A | M6 | 8.8 | Galvanized | Nm | 9 |
| Phosphated | Nm | 9 | |||
| 10.9 | Galvanized | Nm | 13 | ||
| Phosphated | Nm | 12 | |||
| 12.9 | Galvanized | Nm | 16 | ||
| Phosphated | Nm | 14 | |||
STARTER
| Number | Designation | Engine 264 | |
|---|---|---|---|
| BA15.30-P-1001-01U | Bolt, starter/cover for starter opening to crankcase | Nm | 39 |
AUTOMATIC TRANSMISSION COMPLETE
| Number | Designation | Transmission 725.0 | |
|---|---|---|---|
| BA27.10-P-1001-04H | Screw/bolt, transmission to engine | Nm | 39 |
AUTOMATIC TRANSMISSION COMPLETE
| Number | Designation | Transmission 725.0 | |
|---|---|---|---|
| BA27.10-P-1024-04H | Bolt, ground line to transmission housing | Nm | 20 |
TORQUE CONVERTER
| Number | Designation | Transmission 725.0/1 | ||
|---|---|---|---|---|
| BA27.20-P-1001-01D | Bolt, torque converter to drive plate/star-shaped drive plates Angled threaded connection | Stage 1 | Nm | 3 |
| Stage 2 | Nm | 30 | ||
| Stage 3 | ∠° | 90 | ||
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1009-06A | Multi-purpose paste | A 000 989 80 51 |
| BR00.45-Z-1028-04A | Assembly cleaner | A 000 986 56 01 |