Suspension -- 203 Chassis
- General Information
- Basic Knowledge
- Nivomat, function - GF32.30-P-0001P
- Table of contents, function description Nivomat - GF32.30-P-0999P
- Nivomat, loaded, unregulated, function - GF32.30-P-2000P
- Nivomat, loaded, regulated, function - GF32.30-P-2100P
- Nivomat suspension, function - GF32.30-P-2200P
- Nivomat level control, function - GF32.30-P-2300P
- Nivomat damping, function - GF32.30-P-2400P
- Nivomat damping element, design - GF32.30-P-4000-03P
- Nivomat damping element, location/task/design - GF32.30-P-4000P
- Survey of system components, Nivomat, location/task/design/function - GF32.30-P-9999P
- Safety Precautions
- Trouble Diagnosis
- Testing & Repair
- Testing and repair work: Passenger cars: Suspension - AR32.00-Z-9203AA
- Tensioning and untensioning spring - AR32.20-P-0200-01A
- Remove/install front spring - AR32.20-P-0200P
- Remove/install front spring - AR32.20-P-0200PW
- Remove/install stabilizer bar on front axle - AR32.20-P-0300P
- Remove/install stabilizer bar on front axle - AR32.20-P-0300PW
- Remove/install torsion bar on rear axle - AR32.20-P-0315P
- Remove/install front shock absorber - AR32.25-P-0105P
- Remove/install front shock absorber - AR32.25-P-0105PW
- Remove/install rear shock absorber - AR32.25-P-0110A
- Checking shock absorber - AR32.25-P-0121A
- Rear strut removal and installation - AR32.25-P-1016A
- Remove/install the suspension strut - AR32.25-P-1017P
- Remove/install the suspension strut - AR32.25-P-1017PW
- Disassemble/assemble suspension strut - AR32.25-P-1018P
- Disassemble/assemble suspension strut - AR32.25-P-1018PW
- Checking hydraulic pump - AR32.30-P-0510A
- Rear suspension-control module - Operation check - AR32.30-P-0520A
- Connecting and disconnecting tester at rear axle level controller - AR32.30-P-0530-01A
- Testing pressure at rear axle level controller - AR32.30-P-0530A
- Check, adjust gap between strut and wheel-housing - AR32.30-P-0610-01A
- Rear hydraulic suspension pressure accumulator, removal and installation - AR32.30-P-0620A
- Detaching and attaching torsion bar connecting rod on rear axle - AR32.30-P-0630-01P
- Emptying and filling pressure oil system - AR32.30-P-0630A
- Rear suspension-control module, removal and installation - AR32.30-P-0670A
- Test & Adjustment Values
- Maintenance
- Capacities & Specifications
- Torque Specifications
- Tightening torques: Passenger cars: Suspension - BA32.00-Z-9999AZ
- Front axle torsion bar - BA32.20-P-1000-02B
- Rear axle torsion bar - BA32.20-P-1000-04C
- Front axle shock absorber - BA32.25-P-1000-01B
- Rear axle shock absorber - BA32.25-P-1000-03A
- Rear axle spring strut - BA32.30-P-1000-01B
- Rear axle spring actuator - BA32.30-P-1000-02A
- Rear axle level controller - BA32.30-P-1000-03A
- Miscellaneous Notes
- Scrapping pressure reservoirs for level control and hydropneumatic suspension, central reservoirs for hydropneumatic suspension - OS32.00-P-1000-01A
- Disposing of damper strut - OS32.25-P-0120-01A
- Disposing of shock absorber - OS32.25-P-0121-01GC
- Dispose of strut - OS32.25-P-0122-01GC
- Scrapping gas-filled shock absorbers - OS32.25-P-1000-01A
- Disposing on spring actuator - OS32.30-P-0620-01A
- Disposing of shock absorber/ADS - OS32.32-P-0605-01A
- Scrapping hydropneumatic compensating springs - OS32.40-P-1000-01A
- Disposal of lateral acceleration switches for hydropneumatic suspension containing mercury - OS32.40-P-1000-02A