Section 254 (Dual Clutch Transmission Diagnosis (2 Of 2) - 1.6L)
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
- DTC Index
- DTC P087A-64: Clutch 2 Motor Hall Sensor Circuit
- DTC P0880-1C: TCM Power Input
- DTC P0900-01: Clutch 1 Motor U/V/W Circuit
- DTC P0901-71: Clutch 1 System Actuator Stuck
- DTC P0901-73: Clutch 1 System Stuck Off
- DTC P0901-78: Clutch 1 System Reference Position Failure
- DTC P0901-7F: Clutch 1 System Stuck Off
- DTC P0904-12: Select 1 Position Sensor Short To Battery
- DTC P0904-14: Select 1 Position Sensor Short To Ground/Open
- DTC P090A-01: Clutch 2 Motor U/V/W Circuit
- DTC P090B-71: Clutch 2 System Actuator Stuck
- DTC P090B-73: Clutch 2 System Stuck Off
- DTC P090B-78: Clutch 2 System Reference Position Failure
- DTC P090B-7F: Clutch 2 System Stuck Off
- DTC P0910-11: Select 1 Solenoid Push/Pull Short To Ground
- DTC P0910-12: Select 1 Solenoid Push/Pull Short To Battery
- DTC P0910-13: Select 1 Solenoid Push/Pull Open
- DTC P0910-15: Select 1 Solenoid LSD Short To Battery
- DTC P0914-64: Shift 1 Motor Hall Sensor Circuit
- DTC P0920-01: Shift 1 Motor U/V/W Circuit
- DTC P0921-77: Gear 1 System Referencing Failure
- DTC P0921-98: Gear 1 System Motor Thermal Damage
- DTC P0955-29: Manual Mode Switch
- DTC P17C0-00: DCT None - EOL
- DTC P1904-12: Select 2 Position Sensor Short To Battery
- DTC P1904-14: Select 2 Position Sensor Short To Ground/Open
- DTC P1910-11: Select 2 Solenoid Push/Pull Short To Ground
- DTC P1910-12: Select 2 Solenoid Push/Pull Short To Battery
- DTC P1910-13: Select 2 Solenoid Push/Pull Open
- DTC P1910-15: Select 2 Solenoid LSD Short To Battery
- DTC P1914-64: Shift 2 Motor Hall Sensor Circuit
- DTC P1920-01: Shift 2 Motor U/V/W Circuit
- DTC P1921-77: Gear 2 System Referencing Failure
- DTC P1921-98: Gear 2 System Motor Thermal Damage
- DTC P2765-12: Input Speed Sensor 2 Short To Battery
- DTC P2765-14: Input Speed Sensor 2 Short To Ground/Open
- DTC P2766-03: Input Speed Sensor 2 Circuit Range/Performance (Invalid Pulse Width)
- DTC P2766-31: Input Speed Sensor 2 Circuit Range/Performance (No Pulse)
- DTC U0001-88: CAN Communication BUS Off
- DTC U0100-87: Lost Communication With ECM/PCM
- DTC U0121-87: Lost Communication With Anti-Lock Brake System (ABS) Control Module
- DTC U1100-87: High Speed CAN 2 Lost Communication (EMS - DCT)
- DTC U1103-41: Check Sum Error With TGS Lever
- DTC U1103-82: TGS Lever Alive Counter Error
- DTC U1103-87: Lost Communication With TGS Lever
- DTC U1117-88: High Speed CAN 2 Communication (EMS - DCT)