Tires, Wheels & Tire Pressure Monitoring System (TPMS)

• Preparation
  • Special Service Tools
  • Commercial Service Tools
• Noise, Vibration And Harshness (NVH) Troubleshooting
  • NVH Troubleshooting Chart
• Road Wheel
  • Inspection
    • Aluminum Wheel
    • Steel Wheel
• Road Wheel Tire Assembly
  • Balancing Wheels (Bonding Weight Type)
    • Removal
    • Wheel Balance Adjustment
  • Tire Rotation
• Low Tire Pressure Warning System
  • System Components
  • System Description
    • Transmitter
    • Remote Keyless Entry Receiver
    • BCM (Body Control Module)
    • Low Tire Pressure Warning Lamp
    • Low Tire pressure Warning Lamp Indication
    • Display Unit
• Can Communication
  • System Description
• Trouble Diagnoses
  • Schematic
  • Wiring Diagram - T/WARN -
  • Control Unit Input/Output Signal Standard
  • ID Registration Procedure
    • Id Registration With Activation Tool
    • Id Registration Without Activation Tool
  • Transmitter Wake Up Operation
    • With Activation Tool
  • Self-Diagnosis
    • Description
    • Function
    • Low Tire Pressure Warning Lamp Diagnostic Chart
  • CONSULT-II Function
    • Function
    • Consult-II Setting Procedure
    • Work Support Mode
      • Operation Procedure
      • Test Item
      • ID Read
      • ID Regist
    • Self-Diagnostic Results Mode
    • Data Monitor Mode
    • Active Test Mode
      • Notes
      • Operation Procedure
      • Test Item
      • Flasher
      • Horn
      • Warning Lamp
      • ID Regist Warning
      • Flat Tire Warning
  • How to Perform Trouble Diagnosis for Quick and Accurate Repair
    • Introduction
    • Work Flow
  • Preliminary Check
  • Malfunction Code/Symptom Chart
• Trouble Diagnosis For Self-Diagnostic Items
  • Inspection 1: Transmitter or Control Unit (BCM)
    • Malfunction Code No. 21, 22, 23 Or 24
  • Inspection 2: Transmitter - 1
    • Malfunction Code No. 31, 32, 33, 34, 41, 42, 43, 44, 45, 46, 47 Or 48
  • Inspection 3: Transmitter - 2
    • Malfunction Code No. 35, 36, 37 Or 38
  • Inspection 4: Vehicle Speed Signal
    • Malfunction Code No. 52
• Trouble Diagnosis For Symptoms
  • Inspection 1: Warning Lamp Does Not Come On When Ignition Switch Is Turned On
  • Inspection 2: Warning Lamp Stays On When Ignition Switch Is Turned On
  • Inspection 3: Warning Lamp Blinks When Ignition Switch Is Turned On
  • Inspection 4: Turn Signal Lamp Blinks When Ignition Switch Is Turned On
  • Inspection 5: ID Registration Can Not Be Completed
• Removal And Installation
  • Transmitter
    • Removal
    • Installation
• Service Data
  • Road Wheel
  • Tire