LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> FX35 RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Tires, Wheels & Tire Pressure Monitoring System (TPMS) >> Trouble Diagnosis For Self-Diagnostic Items >> Inspection 4: Vehicle Speed Signal >> Malfunction Code No. 52

Malfunction Code No. 52

  1. CHECK SELF-DIAGNOSIS RESULTS 
    1. With the ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to the data link connector, then turn the ignition switch ON.
    2. Select "START (NISSAN BASED VHCL)".
    3. Select "BCM" on "SELECT SYSTEM" screen.
      NOTE: If "BCM" is not indicated, go to "CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT ".
    4. Select "BCM C/U" on "SELECT SYSTEM" screen.
    5. Select "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
    6. Check display contents in self-diagnostic results.

    Is "CAN COMM CIRCUIT" displayed in the self-diagnosis display items?

    YES : Malfunction in CAN communication system. GO TO "PRECAUTIONS WHEN USING CONSULT-II ".

    NO : No malfunction. Check combination meter refer to "SYSTEM DESCRIPTION ".

scientia non olet · About LEMON Manuals