Malfunction Code No. 35, 36, 37 Or 38
- CHECK ALL TIRE PRESSURES
- Check all tire pressures. Refer to "TIRE ".
Are there any tires whose pressure is "64 psi" or more?
YES : Adjust tire pressure to specified value.
NO : GO TO 2.
- VEHICLE DRIVING
- Perform ID registration of all transmitters.
- Drive at a speed of 40 km/h (25 MPH) or more for several minutes without stopping.
Check all tire pressures with CONSULT-II "DATA MONITOR ITEM" within 15 minutes after vehicle speed become 17 km/h (11 MPH).
- : Replace transmitter with new one if "DATA MONITOR ITEM" displayed 64 psi or more. Then GO TO 3.
- ID REGISTRATION AND VEHICLE DRIVING
- Perform ID registration of all transmitters.
- Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for 10 minutes. Then check all tire pressures with CONSULT-II "DATA MONITOR ITEM" within 5 minutes.
Does "DATA MONITOR ITEM" display tire pressure as normal without any warning lamp?
YES : INSPECTION END
NO : Go to the inspection applicable to DTC.