Rear Seat Cushion Heater Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Cushion Heater Assembly & Cushion Cover

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Seat Replacement (Tahoe with HP2) or Rear Seat Replacement (Avalanche/Escalade EXT) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Replacement (Tahoe/Yukon/Escalde with Bucket Seat) . Remove the recliner handle. Refer to Rear Seat Recliner Handle Replacement (Tahoe/Yukon/Escalade with Bucket) . Remove the outer finish cover. Refer to Rear Seat Cushion Outer Trim Panel Replacement (with ARS) . Remove the inner finish cover. Refer to Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Bucket) or Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Split Bench) . Remove the cushion lower trim cover. Refer to Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Cushion Trim Panel Replacement (Avalanche/Escalade EXT) or Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Bucket) .
1	Rear Seat Cushion Cover Tip: Disconnect the seat cushion cover j-channel from the seat cushion frame. Disconnect the electrical connector. Pull the seat cushion cover away from the seat cushion pad to disengage the retaining channel.
2	Rear Seat Cushion Heater Assembly

Callout

Component Name

Preliminary Procedure

Remove the rear seat. Refer to Rear Seat Replacement (Tahoe with HP2) or Rear Seat Replacement (Avalanche/Escalade EXT) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Replacement (Tahoe/Yukon/Escalde with Bucket Seat) .
Remove the recliner handle. Refer to Rear Seat Recliner Handle Replacement (Tahoe/Yukon/Escalade with Bucket) .
Remove the outer finish cover. Refer to Rear Seat Cushion Outer Trim Panel Replacement (with ARS) .
Remove the inner finish cover. Refer to Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Bucket) or Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Split Bench) .
Remove the cushion lower trim cover. Refer to Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Cushion Trim Panel Replacement (Avalanche/Escalade EXT) or Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Bucket) .

Rear Seat Cushion Cover
Tip:

Disconnect the seat cushion cover j-channel from the seat cushion frame.
Disconnect the electrical connector.
Pull the seat cushion cover away from the seat cushion pad to disengage the retaining channel.

Rear Seat Cushion Heater Assembly