LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Split Bench)

Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Split Bench)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Seat Recliner Inner Finish Cover & Nut
GM1685312Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .
1 Rear Seat Recliner Inner Finish Cover Nut
Tip:  The nut is located in a recessed hole on the inboard side of the inner trim panel.
2 Rear Seat Recliner Inner Finish Cover
Tip:  Pull away from seat to disengage the integral retainers.
scientia non olet · About LEMON Manuals