Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Split Bench)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Rear Seat Recliner Handle Tip: Using a flat-bladed tool, push the retainer clip downward and pull outward to release the handle. |
| 2 | Rear Seat Recliner Outer Finish Cover Refer to Rear Seat Cushion Outer Trim Panel Replacement (with ARS) . |
| 3 | Rear Seat Recliner Inner Finish Cover Refer to Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Bucket) or Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Split Bench) . |
| 4 | Rear Seat Cushion Trim Panel Screws (Qty: 5)
NOTE:
Refer to Fastener Notice
.
Tighten: 2 N.m (18 lb in) |
| 5 | Rear Seat Cushion Trim Panel Push In Retainer (Qty: 2) |
| 6 | Rear Seat Cushion Trim Panel |