Section 162 (Engine Mechanical - 4.8L, 5.3L, 6.0L And 6.2L (5 Of 5))
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Off-Vehicle Repair Instructions (3 Of 3)
- Crankshaft Front Oil Seal Installation (RPO LY2/LC9/LY5/LMG)
- Crankshaft Front Oil Seal Installation (RPO LY6/L76/L92)
- Oil Pan Installation
- Oil Filter Installation
- Valve Lifter Installation (RPO LY2/LY6)
- Valve Lifter Installation (RPO LC9/LY5/LMG/L76)
- Valve Lifter Installation (RPO L92)
- Cylinder Head Installation - Left Side
- Cylinder Head Installation - Right Side
- Valve Rocker Arm and Push Rod Installation (RPO LY2/LC9/LY5/LMG/LY6/L76)
- Valve Rocker Arm and Push Rod Installation (RPO L92)
- Valve Rocker Arm Cover Installation - Left Side
- Valve Rocker Arm Cover Installation - Right Side
- Engine Valley Cover Installation
- Valve Lifter Oil Filter Installation
- Valve Lifter Oil Manifold Installation
- Engine Coolant Air Bleed Pipe and Hole Cover Installation (RPO LY2/LY6)
- Engine Coolant Air Bleed Pipe and Hole Cover Installation (RPO LC9/LY5/LMG/L76)
- Engine Coolant Air Bleed Pipe and Hole Cover Installation (RPO L92)
- Intake Manifold Installation (RPO LY2/LY6)
- Intake Manifold Installation (RPO LC9/LY5/LMG/L76)
- Intake Manifold Installation (RPO L92)
- Fuel Rail and Injectors Installation
- Throttle Body Installation
- Water Pump Installation (RPO LY2/LC9/LY5/LMG)
- Water Pump Installation (RPO LY6/L76/L92)
- Exhaust Manifold Installation - Left Side
- Exhaust Manifold Installation - Right Side
- Oil Level Indicator and Tube Installation
- Automatic Transmission Flex Plate Installation
- Crankshaft Balancer Installation
- Engine Prelubing