Supplemental Inflatable Restraint System

• Description & Operation
• Component Locations
• System Operation Check
• Air Bag Safety Precautions
• Adjustments
  • Centering Sir Coil Assembly
    • With Centering Window & No Service Lock
    • With Service Lock & No Centering Window
    • Without Centering Window Or Service Lock
• Disabling & Activating Air Bag System
  • Notes
  • Disabling System
    • Notes
    • Zone 1
    • Zone 3
    • Zone 5
    • Zone 7
  • Activating System
    • Zone 1
    • Zone 3
    • Zone 5
    • Zone 7
• Disposal Procedures
  • Notes
  • On-Vehicle Deployment
  • Off-Vehicle Deployment
• Post-Collision Inspection
• Removal & Installation
  • Notes
  • Air Bag Modules
    • Removal & Installation (Driver-side)
    • Removal & Installation (Passenger-side)
  • Front End Discriminating Sensor (Passenger-Side)
    • Removal
    • Installation
  • Instrument Panel Cluster (IPC)
    • Removal & Installation
  • Sensing & Diagnostic Module (SDM)
    • Removal
    • Installation
  • Sir Coil Assembly
    • Notes
    • Removal & Installation
  • Steering Wheel
    • Removal & Installation
• Diagnostics
  • Notes
  • Diagnostic Trouble Codes (DTC'S)
  • Scan Tool Diagnostics
  • Diagnostic Procedures
    • Notes
    • Perform SIR Diagnostic System Check
    • Refer To Proper Diagnostic Test
    • Repeat SIR System Diagnostic Check
• Diagnostic Tests
  • Sir Diagnostic System Check
    • Notes
    • Diagnostic Procedure
  • Connector Identification
  • Air Bag Warning Light Circuit Malfunction
    • Circuit Description
    • Diagnostic Aids
    • Diagnostic Procedure
  • DTC B0016,B0017,B0018: Passenger-Side Air Bag Deployment Loop Resistance Low/Resistance High/Short To Ground Or Voltage
    • Circuit Description
    • Conditions For Setting DTC
    • Action Taken
    • Conditions For Clearing DTC
    • Diagnostic Aids
    • Diagnostic Procedure
  • DTC B0022, B0024, B0026: Driver Deployment Loop Resistance Low/Short To Ground Or Voltage/Resistance High
    • Circuit Description
    • Conditions For Setting DTC
    • Action Taken
    • Conditions For Clearing DTC
    • Diagnostic Aids
    • Diagnostic Procedure
  • DTC B0035: Discriminating Sensor Voltage Low
    • Circuit Description
    • Conditions For Setting DTC
    • Action Taken
    • Conditions For Clearing DTC
    • Diagnostic Aids
    • Diagnostic Procedure
  • DTC B0036: Discriminating Sensor Voltage High
    • Circuit Description
    • Conditions For Setting DTC
    • Action Taken
    • Conditions For Clearing DTC
    • Diagnostic Aids
    • Diagnostic Procedure
  • DTC B0051: Deployment Commanded
    • Circuit Description
    • Conditions For Setting DTC
    • Action Taken
    • Conditions For Clearing DTC
    • Diagnostic Procedure
  • DTC B0053: Deployment Commanded With Loop Malfunction
    • Circuit Description
    • Conditions For Setting DTC
    • Action Taken
    • Conditions For Clearing DTC
    • Diagnostic Aids
    • Diagnostic Procedure
  • DTC B1000: Internal SDM Failure
    • Circuit Description
    • Conditions For Setting DTC
    • Action Taken
    • Conditions For Clearing DTC
    • Diagnostic Aids
    • Diagnostic Procedure
  • DTC B1001: Option Configuration Error
    • Circuit Description
    • Conditions For Setting DTC
    • Action Taken
    • Conditions For Clearing DTC
    • Diagnostic Aids
    • Diagnostic Procedure
• Wire Repair
• Torque Specifications
• Wiring Diagrams