LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Removal & Installation >> Sensing & Diagnostic Module (SDM) >> Removal

Sensing & Diagnostic Module (SDM): Removal

  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See ZONE 7  under DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Remove driver's seat. Remove carpet retaining sill trim molding. Fold back carpet to access SDM. Remove Connector Position Assurance (CPA) clip and disconnect SDM harness connector from SDM. See Figure. Remove SDM mounting nuts. Remove SDM.
scientia non olet · About LEMON Manuals