Section 199 (Engine Mechanical - 3.6L (LF4) - Repair Instructions (4 Of 4))
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Repair Instructions
- Crankshaft and Bearing Removal and Installation
- Single Use Fasteners and Components
- Special Tools
- Removal Procedure
- Disassemble Procedure
- Cleaning and Inspection Procedure - Required
- Installation Procedure
- Crankshaft Bearing Clearance Measurement Procedure
- Connecting Rod Bearing Clearance Measurement Procedure - Using Plastic Gaging
- Connecting Rod Bearing Clearance Measurement Procedure - Using EN-43690-A and EN-43690-100
- Connecting Rod Final Assembly Procedure
- Oil Filter Fitting Replacement
- Engine Oil Pressure Sensor Replacement
- Engine Oil Level Indicator Switch Replacement
- Oil Pump Suction Pipe and Screen Assembly Replacement
- Engine Replacement (with MHU)
- Engine Replacement (with MG9)
- Engine Removal and Installation (with MHU)
- Engine Removal and Installation (with MG9)
- Engine Block Overhaul
- Single Use Fasteners and Components
- Special Tools
- Removal Procedure
- Disassemble Procedure
- Cleaning and Inspection Procedure - Required
- Installation Procedure
- Crankshaft Bearing Clearance Measurement Procedure
- Connecting Rod Bearing Clearance Measurement Procedure - Using Plastic Gaging
- Connecting Rod Bearing Clearance Measurement Procedure - Using EN-43690-A and EN-43690-100
- Assemble Procedure
- Engine Oil and Oil Filter Replacement
- Valve Spring Inspection and Measurement
- Valve and Seat Grinding
- Valve Cleaning Procedure
- Valve Visual Inspection Procedure
- Valve Measurement Overview
- Valve Seat Width Measurement Procedure
- Valve Seat Roundness Measurement Procedure
- Valve Margin Measurement Procedure
- Valve-to-Seat Concentricity Measurement Procedure
- Valve and Seat Reconditioning Procedure
- Valve Stem Height Measurement Procedure
- Thread Repair
- Service Prior to Assembly
- Engine Prelubing
- Crankshaft and Bearing Removal and Installation