Cylinder Head, Engine Oil Pan, Crankshaft, Crankshaft Seal, Pistons & Piston Rings, Timing Case Cover, Flywheel, Crankcase Ventilation System, Vibration Damper -- Repair X5 M (F95)

• 11 12 Cylinder Head With Lid
  • 11 12 165 Replacing cylinder head at left (X5 M)
    • Disassemble cylinder head on left and assemble
  • 11 12 166 Replacing right cylinder head (X5 M)
    • Disassembling and assembling cylinder head, right
  • 11 12 729 Checking cylinder head for watertightness (Cylinder head disassembled) (X5 M)
    • Checking cylinder head for watertightness
• 11 13 Oil Pan
  • 11 13 010 Removing and installing/replacing upper oil sump section (X5 M)
    • Notes
    • Removing upper oil sump section
    • Replacing upper oil sump section
    • Installing the upper oil sump section
  • 11 13 020 Removing and installing/replacing the lower oil pan section (X5 M)
    • Remove lower oil pan section
    • Replace the lower oil sump section
    • Install the lower oil pan section
• 11 14 Timing Case Housing Cover
  • 11 14 080 Removing and installing/sealing or replacing top left timing case cover (X5 M)
    • Remove the sealing cap on the cylinder head of the cylinder bank 2
    • Installing the sealing cap on the cylinder head of cylinder bank 2
  • 11 14 085 Removing and installing/sealing or replacing top right timing case cover (X5 M)
    • Removing the sealing cap at the cylinder head of cylinder bank 1 (cylinder head cover mounted)
    • Install the sealing cap on the cylinder head of cylinder bank 1 (cylinder head cover mounted)
  • 11 14 110 Removing and installing/sealing or replacing lower timing case cover (X5 M)
    • Remove timing case cover, bottom
    • Install timing case cover, bottom
  • 11 14 141 Replacing radial shaft seal in the timing case cover (X5 M)
    • Replacing front crankshaft seal
  • 11 14 151 Replace the crankshaft seal (transmission side) (X5 M)
    • Remove the sealing cap with radial shaft seal
    • Install the sealing cap with radial shaft seal
• 11 15 Crankcase Ventilation
  • 11 15 002 Replacing the engine ventilation line sensor for cylinders 1-4 (X5 M)
    • Removing engine ventilation line of cylinder bank 1
    • Installing engine ventilation line of cylinder bank 1
  • 11 15 003 Replacing the engine ventilation line sensor for cylinders 5-8 (X5 M)
    • Removing engine ventilation line of cylinder bank 2
    • Install the engine ventilation line of cylinder bank 2
  • 11 15 140 Replacing oil separator for crankcase ventilation system (X5 M)
    • Replacing the left oil separator
    • Replacing the right oil separator
  • 11 15 510 Measuring internal engine pressure (After vehicle diagnosis) (X5 M)
    • Checking internal engine pressure
• 11 21 Crankshaft With Bearing
  • 11 21 122 Table of bearing shells, guide bearing shell, bearing seat 3 S63 (X5 M)
  • 11 21 500 Replace crankshaft (engine removed) (X5 M)
    • Removing crankshaft
    • Installing the crankshaft
  • Table of bearing shells and bearing seat 1, 2, 4, 5 S63 (X5 M)
• 11 22 Flywheel
  • 11 22 000 Removing and installing/replacing the flywheel (X5 M)
    • Removing flywheel
    • Installing the flywheel
  • 11 22 510 Removing and installing/replacing the flywheel (Transmission developed) (X5 M)
    • Removing flywheel
    • Installing the flywheel
  • 11 22 513 Replacing roller bearing for dual-mass flywheel (S63O0, S63T2, S63T4) (X5 M)
• 11 23 Vibration Damper
  • 11 23 010 Removing and installing/replacing vibration damper (X5 M)
    • Removing the vibration damper
    • Replacing front crankshaft seal
    • Installing the vibration damper
• 11 25 Piston With Rings And Bolts
  • 11 25 000 Removing and installing/replacing all pistons (X5 M)
    • Notes
    • Removing the piston with connecting rod
    • If necessary: Replacing the piston
    • Installing piston with connecting rod