Install the lower oil pan section

Clean the sealing surface in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Remove the seal (1).
Clean sealing surfaces.
Position seal on the lower oil pan section.
Parts: Gasket

Courtesy of BMW OF NORTH AMERICA, INC.
Position the lower oil pan section (2).
Replace screws.
Parts: Screws

Tighten the screws in this area (1).

TIGHTENING TORQUE SPECIFICATIONS

Lower oil sump section
M6x25 Replace screws.	Tightening torque	10 Nm

G15067525

Courtesy of BMW OF NORTH AMERICA, INC.

Connect plug connection (2) and lock.
Attach the cable clip (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Position sealing ring (1) on the oil drain plug (2).
Parts: Sealing ring

Tighten oil drain plug (2).

TIGHTENING TORQUE SPECIFICATIONS

Oil drain plug on oil sump
M18x1.5 Replace the sealing ring.	tightening torque	40 Nm

G14261688

Courtesy of BMW OF NORTH AMERICA, INC.

Turn the oil filler cap (1) clockwise and shut it.
NOTE:
RISK OF DAMAGE
Contaminant or foreign body.
Contamination can result in malfunctions, loss of function or leaks.
- Adhere to the utmost cleanliness.
- Protect components from contamination e.g. by covering.
- Close off line connections with seal plugs.
Courtesy of BMW OF NORTH AMERICA, INC.
Open the oil filler cap (1).

Pour in engine oil.

TECHNICAL DATA SPECIFICATION

Engine oil S63B44T4
Filling capacity, motor oil change with oil filter element		10 L

Courtesy of BMW OF NORTH AMERICA, INC.
NOTE:
RISK OF DAMAGE
Contaminant or foreign body.
Contamination can result in malfunctions, loss of function or leaks.
- Adhere to the utmost cleanliness.
- Protect components from contamination e.g. by covering.
- Close off line connections with seal plugs.
Close the oil filler cap (1).

Follow-up work

Refer to TIGHTENING THE OIL DRAIN PLUG .
Refer to REMOVING THE OIL FILLER CAP .
Refer to FILLING ENGINE OIL .
Refer to INSTALLING THE OIL FILLER CAP .
Refer to CHECKING ENGINE OIL LEVEL .
Refer to INSTALLING THE STIFFENING PLATE .