Section 202 (Cylinder Head -- Repair X2 (F39))
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- 11 12 Cylinder Head With Lid
- 11 12 100 Removing and installing cylinder head (X2 xDrive 28i 2018-2023)
- 11 12 101 Replace cylinder head gasket (X2 xDrive 28i 2018-2023)
- 11 12 161 Replace cylinder head (X2 xDrive 28i 2018-2023)
- 11 12 411 Sealing/replacing cylinder head screw plugs (X2 xDrive 28i 2018-2023)
- 11 12 000 Removing and installing/sealing cylinder head cover (X2 sDrive 28i 2018-2023, X2 xDrive 28i 2018-2023)
- 11 12 001 Replace the cylinder head cover (X2 sDrive 28i 2018-2023, X2 xDrive 28i 2018-2023)
- 11 12 070 Remove and install/replace acoustic cover (X2 sDrive 28i 2018-2023, X2 xDrive 28i 2018-2023, X2 M35i 2019-2022)
- 11 12 100 Removing and installing cylinder head (X2 sDrive 28i 2018-2023)
- 11 12 101 Replace cylinder head gasket (X2 sDrive 28i 2018-2023)
- 11 12 161 replace cylinder head (X2 sDrive 28i 2018-2023)
- 11 12 411 Sealing/replacing cylinder head screw plugs (X2 sDrive 28i 2018-2023)
- 11 12 502 Disassemble and assemble cylinder head (X2 sDrive 28i 2018-2023, X2 xDrive 28i 2018-2023, X2 M35i 2019-2022)
- Installing the cylinder head on the assembly jig
- Checking the position of the intake camshaft
- Remove torsion springs
- Removing all gates
- Removing all intermediate levers
- Remove intake camshaft
- Remove eccentric shaft
- Remove exhaust camshaft
- Remove all roller cam followers
- Removing all hydraulic valve clearance compensating elements
- Remove all valve springs
- Remove valve stem seals
- Remove all valves
- Install all valves
- Installing valve stem seals
- Install all valve springs
- Installing all hydraulic valve clearance compensating elements
- Install all roller cam followers
- Install eccentric shaft
- Install intake camshaft
- Install exhaust camshaft
- Checking the intermediate lever classification
- Installing all intermediate levers
- Installing all gates
- Installing torsion springs
- Adjusting the camshafts with the special tool
- Removing the cylinder head from the assembly jig
- 11 12 001 Replace the cylinder head cover (X2 M35i 2019-2022)
- 11 12 100 Removing and installing cylinder head (X2 M35i 2019-2022)
- 11 12 101 Replace cylinder head gasket (X2 M35i 2019-2022)