Remove eccentric shaft
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Release screws (1) and set down the bearing cap neatly in special tool 0 495 105 (11 4 480) .
- Release screws (2) and set down the bearing bracket neatly in special tool 0 495 105 (11 4 480) .
- For an engine that has been in use, make sure all bearing brackets are reinstalled in the same position.
- Remove the eccentric shaft (1) in the direction of the arrow.